TCI 122411 DC MAXI JOLLY US – Limited Stock

122411 Common Data

Rated Voltage 110 ÷ 127 V(2) / 220 ÷ 240 V
Frequency 50…60 Hz
AC Operation range 99 ÷ 264 V
DC Operation range DC 170 ÷ 280 V (NO PUSH mode function)
Power 0 ÷ 50 W
Output current ripple ≤ 3%(1)
Max. pcs for CB B16A (see page info17) 15 pcs
In rush current 20A 400µsec

Reference Norms

CSA-C22.2 n° 107.1(2)
CSA-C22.2 n° 250.13(2)
EN 50172 (VDE 0108)
EN 55015
EN 61000-3-2
EN 61000-3-3
EN 61347-1
EN 61347-2-13
EN 61547
EN 62384
UL 1012(2)
UL 8750(2)

122411 Dimensions

Top view

Side view

122411 Operation Mode

• Light regulation 0/0,5 – 100 % by means of PUSH function, 1…10 V interface (I=1 mA) or 100 Kohm potentiometer.
• Light regulation 0/0,5 – 100 % by means of PUSH function (mains voltage):

– a short push to turn on and off;
– a longer push to increase or decrease light intensity;
– regulation automatically stops at minimum and maximum values;
– for another on, regulation or off command, release the push button and give the desired command again.
• Possibility to use PUSH function to 4/5 drivers without sync cable.
• Maximum length of the cable, from push button to last driver, must be max. 15 m / 49 ft. In case of applications where the cable is longer than 15 m / 49 ft, keep this separate from the 110 – 240 Volt mains cable.

• ATTENTION: only use normally open push buttons with no incorporated warning light.
• Specific dimming terminal connection with a 1…10 Vdc electronic potentiometer (1…10 V local dimming, double insulation required for external connection).
• Max. 10 synchronised drivers of which only one can be controlled (1 Master + 9 Slaves of any JOLLY Series).
• Synchronization cable supplied separately.
• Regulation is possible by means of DALI and DMX coupled with DALI/DMX INTERFACE. For additional details for regulations see pages info12-14.

Compact multi-current 1-10V LED drivers are versatile, space-saving power supplies that allow installers to select exact output currents (using built-in DIP switches) to match specific LED fixtures. They translate standard 1-10V analogue signals to smoothly and accurately dim connected LEDs, typically from 10% to 100% or down to 0% brightness.

Core Features

Multi-Current Selectability: Feature physical or digital DIP switches allowing you to toggle the driver to various constant current (mA) settings (e.g.350mA, 500mA & 700mA) to support different luminaires.

Ultra-Compact Footprint: Engineered for tight installations, such as slim ceiling voids, small junction boxes, or tight recesses.

1-10V Analogue Dimming: Uses a low-voltage, wired 2-core control pair. A 1V signal equates to minimum brightness, while a 10V signal delivers full 100% output.

How They Work

These drivers operate via Constant Current (CC), providing a fixed electrical current required by LEDs while letting the voltage fluctuate to maintain a stable light output.

Wiring: LEDs must be wired strictly in series so that the exact same current passes through each module.

Dimming Signal: The 1-10V dimmer switch sends an analogue signal which dictates the output. The drivers often support “3-in-1” dimming, meaning they can also respond to variable resistance (potentiometers) or PWM signals.

Control Capacity: You can often wire up to 40 individual drivers to a single 1-10V dimmer, as the control circuit only draws a minute amount of current.

TCI is a worldwide known Italian Manufacturer leader in the production of electronic components for lighting applications. Their passion for Light dates back more than 40 years ago and has evolved over the time, always preserving the typical values of the Italian tradition: quality and reliability. TCI trust in the proactivity as the driving force of change and improvement.

Currently their products range includes LED DRIVERS, LED MODULES, COBS, OLEDS and WIRELESS SOLUTIONS, beyond the traditional technology.

Since 2006 the Standards and Approvals Department of TCI does tests under WMT IECEE and SMT IECEE on all their products to ensure that they comply with all the most severe international standards as it concerns safety, performance and EMC and to obtain the relevant certifications.

TCI extends over an area of more than 50,000 square meters including several production units and warehouses, R&D departments, commercial offices, quality control, accounting and marketing departments as well as a Patent Office. TCI employs more than 200 people, generating a turnover of over 210 million Euro.

TCI deeply believes in the importance of Innovation and therefore we provide our Customers with constantly updated products and customised solutions.

Their R&D Department represents the engine of TCI innovative boost. Great investments are allocated to this area to provide it with the most sophisticated equipment allowing the development of innovative and first class solutions, based on a strong up-to-date know-how.

TCI, a leading manufacturer of electronic components for lighting, offers LED DRIVERS, LED MODULES, COB, OLED and WIRELESS SOLUTIONS, in addition to traditional technology.

Not just a supplier, but a partner for the development of tomorrow’s technological strategies and solutions.