Tridonic 28000210 LCAI 070/0300 I010 one4all – Limited Stock

28000210 Common Data

Rated supply voltage 220 – 240 V
AC Voltage range 198 – 264 V

DC Voltage range 170 – 280 V
Mains frequency 0 / 50 / 60 Hz
Typ. rated current (at 230 V / 50 Hz / full load)1 360 mA

Mains current (at 220 V / 0 Hz / full load)2 100 mA
Leakage current (PE) 0.4 mA
Max. input power 77 W

Typ. efficiency (at 230 V, 50 Hz, full load)1 93 %
Typ. λ (at 230 V / 50 Hz / full load) 1 0.95
Typ. power input on standby < 1 W

Switch-on time (DC mode) 0.4 s
Switch-on time (at 230 V / 50 Hz / full load / acc. to
the DALI standard)1 0.6 s

Switchover time (AC/DC) 0.2 s
Turn off time (at 230 V / 50 Hz / full load) 0.1 s
Hold on time at power failure (output)3 4 ms

Output current ripple 18 %
Max. non-repetitive output peak current 600 mA
PWM frequency 400 Hz
Dimming range 3 – 100 %

Burst / surge peaks output side against PE 4 kV
Operating temperature range ta -20 … +50 °C
Max. casing temperature tc 70 °C

Dimensions LxWxH 280 x 30 x 21 mm
Hole spacing D 270 mm

28000210 Wiring

Wiring guidelines

• The secondary cables should be run separately from the mains connections and mains cables to ensure good EMC conditions
• The LED wiring should be kept as short as possible to ensure good EMC. The max. secondary cable length must not exceed 2m. Cable lengths bigger than 2m may lead to a malfunction of the LED control gear.

• Secondary switching is not permitted.
• The LED control gear does not have polarity reversal protection on the secondary side.

LED modules that do not have polarity reversal protection may be damaged if polarity is reversed

Wiring type and cross section

The wiring can be in stranded wires with ferrules or solid from 0.5 – 1.5 mm². For perfect function of the push-wire terminals (WAGO 250) the strip length should be 7.5 – 8.5mm.

Release of the wiring

Press down the “push button” and remove the cable from front.

Isolation and electric strength testing of luminaires

Electronic devices can be damaged by high voltage. This has to be considered during the routine testing of the luminaires in production.

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.