Tridonic 28000348 LCAI 65W 150mA–400mA ECO INDUSTRY sl – Limited Stock

28000348 Common Data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V
Mains frequency 0 / 50 / 60 Hz

Overvoltage protection 320 V AC, 48 h
Typ. rated current (at 230 V, 50 Hz, full load) 12 323 mA
Typ. current (220 V, 0 Hz, full load, 15 % dimming level) 256 mA
Leakage current (PE) < 0.27 mA
Typ. power consumption on stand-by 3 0.123 W

THD (at 230 V, 50 Hz, full load) 1< 5.3 %
Starting time (at 230 V, 50 Hz, full load) 1< 0.6 s
Starting time (DC mode) < 0.2 s
Switchover time (AC/DC) 4< 0.2 s
Turn off time (at 230 V, 50 Hz, full load) < 50 ms
Hold on time (at 230 V, 50 Hz, full load) 520 ms

Output current tolerance 16 ± 3 %
Max. output current peak (non-repetitive) ≤ output current + 18 %
Output LF current ripple (< 120 Hz) < 2 %
Output P_ST_LM (at full load) ≤ 1

Output SVM (at full load) ≤ 0.4
Max. output voltage (U-OUT) 250 V
PWM frequency 7500 Hz
Dimming range 1 – 100 %

Dimming range (without PWM) 35 – 100 %
Mains surge capability (between L – N) 4 kV
Mains surge capability (between L/N – PE) 4 kV

Surge voltage at output side (against PE) < 0.5 kV
Type of protection IP20
Lifetime up to 100,000 h
Dimensions L x W x H 425 x 30 x 28 mm

28000348 Wiring guidelines

• Run the secondary lines separately from the mains connections and lines to achieve good EMC performance.
• The max. secondary cable length is 2 m (4 m circuit), this applies for LED output as well as for I-SELECT 2.
• For good EMC performance, keep the LED wiring as short as possible.
• Secondary switching is not permitted.

• The LED Driver has no inverse-polarity protection on the secondary side. Wrong polarity can damage LED modules with no inverse-polarity protection.
• Wrong wiring of the LED Driver can lead to irreparable damage and no proper function is given anymore.
• With mains transients of 4 kV can voltage peaks up to 4 kV occur against PE at the output of the LED Driver. This has to be considered concerning the dielectric strength of the LED module (insulation against PE).
• To avoid the damage of the Driver, the wiring must be protected against s

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.

https://www.tridonic.com/en/int/company/about-tridonic