EASEIC 633118 LND118AL – Design and Quality EASEIC of USA

633118 Common Data

633118 Electrical Specifications

633118 Ordering Information

Type LND118AL
Order Code 633118
Full product name Smart 18W 3-66V 200-1050mA Dali Dim

633118 Input Information

Line Voltage 100-240Vac_rms
Line Current 0.44A@100VAC / 0.36A@120VAC / 0.19A@230VAC
Line Frequency 50/60Hz
Min, Mains Voltage operational 90[min]
Max, Mains Voltage operational 277[max]
THD(total) <10% Power Factor(PF) >0.95
Input Power (Max.) 21W
Efficiency @Max Load and 70℃ case 87%@100VAC / 87%@120VAC / 88%@230VAC
Inrush Current(Typ.) Cold Start 55A(twidth=270us measured at 50% Ipeak) at 230VAC
Leakage Current(Typ.) <0.5mA/230VAC

633118 Output Information

Output Power 18W(See Output current settings table)
Output voltage 3V to 66V
Output Constant Current 200-1050mA ±5%(See Output current settings table)
Maximum open circuit voltage <75V
Output Current Ripple (ripple=peak to peak) 2% of nominal output voltage (whichever is greater),measured at 20Mhz bandwidth with 0.1uf ceramic capacitor in parallel with 10uf electrolytic capacitor connected at the end of the output connector.
Protections Over Current, Over Voltage, Short Circuit and Open Circuit Protection for LED+ and LED-
Ambient Temp Range -20℃ to +50℃, 20-95% RH non-condensing
Max Case Temperature(Tc) 75℃ for Life & 85℃ for UL Safety

633118 Dimming Features

Dimming Interface DALI(IEC62386), 1-10v, PWM, Resistor, Switch Dim
DALI Dimming Specifications Sink Current <2mA
Dimming range 0-100%

Environment & Approbation

Environmental Protection Rating UL damp and dry
Agency Approbations UL8750,UL1310, CSA-C22.2 No.250.0-08,ENEC EN61347-1,EN61347-2-13 independent, EN62384, TUV EN60950-1
Electromagnetic Compliance FCC Title 47 Part 15 Class A Compliance to EN55015,EN61000-3-2 Class C(@100% Load);en6100-3-3 Compliance to EN61000-4-2,3,4,5,6,8,11;EN61547,EN55024, light industry level(surge 2KV), criteria A
Audible noise <24dB Class A

Other information

Dimension 280x30x26mm (LxWxH)
Packing 0.23Kg(0.51lbs); 40Pcs/10.1kg(22.2Lbs)

1-10v Interface dimming control

The 1-10V input is operable via commercially available simple rotary wall switches designed for 1-10V dimming equipment or from dedicated
system central dimming controllers.

Note: This 1-10v terminal also could be used for switch-dim terminal, but different from DALI switch dim terminal, this switch dim terminal just could be worked with low voltage switch(It means not need to wire connect with L).

When use this port for switch, firstly need to press the switch for 4 or 5 times, then let it come into switch dim function, If you wire more than 2 lamps, you could find maybe these lamps not be synchronous. At this situation, if you want them keep synchronous, short press switch more than 6 or 7 times, when all these lamps under control, whether these lamp brightness is same or not, long press the switch and then all these lamps will increase 100% brightness. Then it will memory this and all these lamps will be synchronous.

Switch-Dim dimming control(DALI side high voltage Push dim)

Digital DALI signal or switchDIM can be wired on the same terminals (DA/N and DA/L).
By pressing the push button for less than one second the LEDs turn on or off.
By pressing the push button for more than one second the light intensity of the LEDs is dimmed according to the following modalities:

If the light intensity is not at maximum, by pressing the key there will be an increase of this to maximum or to the corresponding level at the moment the key is released;

A further pressure on the key inverts the dimming direction to the minimum value or to the corresponding level at the moment the key is released;

If light intensity is at maximum by pressing the key there will be a decrease to the minimum value or to the corresponding level at the moment the key is released.

DALI interface dimming control

LND series of LED dimming driver, in line with DALI protocol specification IEC62386, acceptable compliance with ON / OFF, scenes and dimming DALI controller instruction norms issued.

Each DALI subnets can only have a maximum of 64 DALI slave devices (DALI LED dimming drivers).

Each DALI LED dimming drivers will consume 2mA control terminal of the current.

DALI connections of up to 300 m can be made with any 2 wire 0.5 – 1.5 mm2 mains rated cable.

DALI cable must be mains-rated and the maximum voltage drop along the length of the cable must not exceed 2V.

In rare instances where the environment may be electrically noisy, due to adjacent circuits carrying high switching currents, we recommend a 2 wire twisted pair screened and sheathed cable.

Constant Current DALI LED drivers are advanced power supplies that regulate a fixed, consistent, and adjustable output current (e.g.350mA-700mA) for LEDs, while supporting intelligent digital dimming. They are ideal for commercial, architectural, and high-efficiency lighting applications using series-wired fixtures. These drivers enable individual or group, flicker-free dimming (down to 0.1%) using DALI-1 or DALI-2 protocols.

Key Features and Benefits

Constant Current Regulation: Ensures consistent light output and protects LEDs from current fluctuations.

DALI Compatibility: Enables bidirectional communication for control and monitoring.

Flexibility: Many models feature dip switches to select specific amperage outputs (e.g., 250mA, 350mA, 500mA, 700mA).

Dimming Performance: Supports smooth, deep dimming (0.1% to 100%).

Advanced Features: Some models support NFC configuration for setting addresses, dimming curves, and maximum levels without powering on the driver.

Safety & Efficiency: Typically Class 2 rated with high power factors (up to 0.98), making them efficient.

Common Applications

Commercial Lighting: Office and retail spaces.

Architectural Lighting: Accent and cove lighting.

Downlights and Spotlights: Ideal for high-power LED arrays.

Common Specifications

Input Voltage: Usually 100-240V or 220-240V AC.

Output Power: Ranges from low wattage up to 1000W, commonly 10W-60W.

IP Rating: Commonly IP20 for indoor use, though higher ratings are available.

Compliance: IEC 62386 (DALI).

EASEIC (Easeic Sci-Tech Co., Ltd.) is a New York-founded (2003) global leader in designing intelligent LED drivers, dimmable electronic ballasts, and lighting control systems. Specializing in EASEIC-led drivers, the company provides compact, high-performance power solutions (DALI, 0-10V, PUSH-Dim) for OEM manufacturers and professional lighting installers, with a strong international presence.

Key Aspects of EASEIC:

Product Specialization: EASEIC focuses on “Smart” LED drivers, offering multi-power, constant current drivers that are DIP-switch adjustable. Their drivers are known for being ultra-slim, making them ideal for linear and recessed fixtures.

Dimming Technology: Their products support various dimming protocols, including DALI, 0-10V/1-10V, and PUSH-Dim. They offer high-performance, smooth dimming, with some drivers capable of starting LEDs at 0.1%.

Key Features: EASEIC drivers typically feature universal AC input (90-265Vac or 100-240Vac), UL Class 2 outputs, and short-circuit/over-voltage protections.

Global Reach & Applications: Founded in the USA, the company has widespread distribution networks across Europe, North America, and Asia. Their solutions are used in high-end projects, including hotels, office buildings, museums, and retail.

Quality & Standards: Products hold major international certifications, including UL/ETL, CE, VDE, and CCC/CQC.

EASEIC Driver Series Examples:

Smart LND Series: Multilevel Constant Current DALI Dimmable drivers (e.g., 36W, 54W).

E-Dimming 0/1-10V Driver: Programmable drivers with DIP-switches for OEM markets.