Philips 929000708703 Xitanium 100W 0.7A Prog+ GL-Z sXt – Xitanium Prog/Prog+ LED Xtreme drivers

929000708703 Operating and Electrical

Order code 929000708703
Full product code 929000708703
Full product name XITANIUM 100W 0.7A Prog+ GL-Z sXt
Net weight per piece 0.74 KG / 1.63 lbs
Interfaces 1-10V Dimming, DALI, AmpDim, Integrated Dynadimmer, AOC(via Rset), MTP (via RNTC)
Ambient Temp Range -40C to +55C
Corresponding Tcase -15C to +80C

0-10V Dimming Specifications 150µA ± 3% source current from driver, Vdim > 14.5V to shutdown driver. See dim curve for detail.
Line Voltage 120-277V
Line Current 0.94A @ 120V, 0.48A @230V, 0.41A @ 277V
Line Frequency 50/60Hz
Min. Mains voltage operational 108 V [min]
Max. Mains voltage operational 305V [max]
Life @ TC 70C Refer to graph below
Life @ TC 80C Refer to graph below
Suitable for Outdoor use? Yes
Max TC 80C
Maximum ballast number on MCB 16A 9 [max]

Input Over-voltage Can survive input over-voltage stress of 320VAC for 48 hours and 350VAC for 2 hours
Earth leakage current <=0.35Ma
Output Current ripple 30% @ 530 mA (ripple = pk-pk/avg)
THD total Refer to graph
PF @ Max Load Refer to graph
Wire Isolation All wires are Double isolated to ground
Isolation between input and output Basic
Isolation towards housing Double
Protections Short Circuit and Open Circuit Protection for LED + and LEDStandby power < 1.0W

Installation & Application Notes:

Section I – Physical Characteristics
1.1 LED Driver shall be installed inside an electrical enclosure
1.2 Wiring inside electrical enclosure shall comply with 600V/105°C rating or higher

Electrical Specifications

1-10V Dimming Curve
Dimming source current from the driver: 150µA (±3%) (@ 0<Vdim<8V)
LED Current Tolerance at any value of Vdim: ± 5% of Imax
Minimum Dim Level: 10% – 100%
Guaranteed Shutdown driver with Vdim>14.5V. Current limit at 3mA typ (4mA Max) at 16V dim

Guaranteed no shutdown driver with Vdim<12V.
Shutdown driver with Vdim>14.5V.
The dimming lead leakage current is 0.01mA. The maximum number of drivers that can be connected in parallel to one dimming control circuit is based on this dimming lead leakage current and the calculation is described in the corresponding Design-in Guide.

Also stocked within the Philips Xitanium Xtreme range.

929000708803
929000702202
929000712703

Dimmable outdoor constant current (CC) LED drivers provide steady current (typically 350mA–700mA) to LEDs, ensuring consistent brightness and longevity in, for example, street lighting, while allowing for adjustable light levels via 0-10V, TRIAC, or DALI systems. These ruggedized, IP-rated drivers (e.g., IP65+) are designed for harsh environments, requiring series wiring for optimal performance.

Key Features and Benefits

Constant Current Regulation: Unlike constant voltage, these drivers adjust voltage to maintain a steady current, preventing premature LED failure.
Dimming Capabilities: Often support 0-10V, DALI, DMX, or trailing-edge (TRIAC) dimming for flexible, mood-setting, or energy-saving control.
Outdoor Durability: Specifically engineered with high IP ratings (IP65, IP66, or IP67) to withstand moisture, dust, and temperature fluctuations.
Efficiency and Protection: These drivers usually operate with high efficiency and include protective features like short-circuit, overload, and thermal protection.

Application and Technical Details

Applications: Ideal for landscape lighting, pathway lighting, architectural highlights, and street lighting.
Wiring Method: Must be wired in a series circuit, where the negative of one light connects to the positive of the next.
Key Specs: Typical outputs include 350mA, 500mA, 700mA, or higher depending on the fixture requirements.

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.