Philips 929000708803 Xitanium 40W 0.7A Prog+ GL-J sXt – Xitanium Prog/Prog+ LED Xtreme drivers

929000708803 Operating and Electrical

929000708803  Electrical input data

Rated input voltage range 108…305 Vac Performance range
Rated input voltage 230 Vac
Rated input frequency range 47…63 Hz Performance range
Rated input current 0.21 A @ rated output power @ rated input voltage
Max. input current 0.45 A @ rated output power @ minimum performance input voltage
Rated input power 48 W @ rated output power @ rated input voltage
Power factor 0.97 @ rated output power @ rated input voltage

Total harmonic distortion 13 % @ rated output power @ rated input voltage
Efficiency 88 % @ rated output power @ 230Vac input voltage @ max. Uout
Rated input voltage DC range 186…250 Vdc Performance range
Rated input current DC range 0.27 Adc
Input voltage AC range 108…305 Vac Operational range
Input frequency AC range 45…66 Hz Operational range
Input voltage DC range 168…275 Vdc Operational range
Standby Power 0.50 W
Isolation input to output SELV

929000708803  Electrical output data

Regulation method Constant Current
Output voltage 29…57 Vdc
Output voltage max. 85 V Maximum voltage at open load
Output current 0.05…0.7 A
Output current min programmable 100 mA
Output current min dimming 47 mA
Output current tolerance ± 5 %
Output current ripple LF ≤ 15 % Ripple = peak / average, < 3kHz
Output current ripple HF ≤ 15 %
Output power 1.4…40 W

Electrical data controls input

Control method 1-10V, AmpDim, DALI, Dynadimmer Output current amplitude dimming, 1-10V: 1-8V curve, acc. IEC60929. Please refer to design-in guide at www.philips.com/oem for more controllability details.
Dimming range 10…100 % For latest DALI certification status please visit www.digitalilluminationinterface.org/products
Isolation controls input to output Double acc. IEC61347-1

929000708803 Wiring and Connections

Input wire cross-section 0.82 / 18 mm2 / AWG solid wire, double-insulated
Input wire strip length 8…12 mm
Output wire cross-section 0.82 / 18 mm2 / AWG solid wire, double-insulated
Output wire strip length 8…12 mm
Control wire cross-section 0.82 / 18 mm2 / AWG solid wire, double-insulated
Control wire strip length 8…12 mm
Maximum cable length 10 m CISPR15: between driver and LED module
Maximum NTC output cable length 0.6 m

Insulation

Mains SELV Basic Double
LED + NTC SELV Double Double
DALI/1-10V Basic Double Double
Housing Double Double Double

929000708803 Dimensions and weight

Length (A1) 148.2 mm
Mounting hole distance (A2) 144.2 mm
Width (B1) 45.7 mm
Width (B2) 27.35 mm
Height (C1) 28.3 mm
Mounting hole diameter (D1) 5 mm
Weight 382 gram

929000708803 Logistical data

Product name Xitanium 40W 0.7A Prog+ GL-J sXt
EOC 871829124503200
Logistic code 12NC 929000708803
EAN1 (GTIN) 8718291245032
EAN3 (box) 8718291245049
Pieces per box 12

Operational temperatures and humidity

Ambient temperature -40…+55 ºC Higher ambient temperature allowed as long as Tcase-max is not exceeded
Tcase-max 80 ºC Maximum temperature measured at Tcase-point
Tcase-life 75 ºC Measured at Tcase-point
Maximum housing temperature 100 ºC In case of a failure, inherent by design
Relative humidity 10…90 % Non-condensing

929000708803 Lifetime

Driver lifetime 100,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10%

929000708803 Storage temperature and humidity

Ambient temperature -40…+80 ºC
Relative humidity 5…95 % Non-condensing

929000708803 Programmable features

Set Adjustable Output Current (AOC) Programmable, Rset2 700 mA
LED Module Temperature Protection (MTP) Yes ON
Driver Temperature Limit (DTL) No
Adjustable Light Output (ALO) No
Constant Light Output (CLO) Yes OFF
Adjustable Start-up Time (AST) Yes 1 s
DALI 253 M No
1-10V Yes ON 1-8V curve only
Integrated Dynadimmer Yes OFF 5-step, light turn-off possible, Dynadimmer and DALI cannot be used simultaneously.
LineSwitch single-step No
AmpDim Yes OFF
Min Dim Level Yes 10 %
DC emergency (DCemDim) No EOFi = 100%. No external DC rated fuse required.
DALI control supported at DC operation Yes ON
End Of Life indicator (EOL) Yes OFF
OEM Write Protection (OWP) No
Luminaire Info (DALI part 251) No

929000708803 Features

Open load protection Yes Automatic recovering
Short circuit protection Yes Automatic recovering
Over power protection Yes Automatic recovering
Hot wiring No
Suitable for fixtures with protection class I and II per IEC60598
Overtemperature protection Yes Automatic recovering
Energy metering (DALI part 252) No
Diagnostics Yes
Diagnostics (DALI part 253) No

Inrush current

Inrush current 65 A Input voltage 230V
Inrush peak width 100 µs Input voltage 230 V, measured at 50% height
Drivers / MCB 16A type B ≤ 21 pcs Indicative value

Driver touch current / protective conductor current

Typical Touch Current (ins. Class II) 0.35 mA peak Acc. IEC61347-1. LED module contribution not included. LED module contribution not included
Typical Protective Conductor Current (ins. Class I) 0.25 mA rms Acc. IEC60598-1. LED module contribution not included. LED module contribution not included

Surge immunity

Mains surge immunity (diff. mode) 4 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode) 4 kV Acc. IEC61000-4-5. 12 Ohm 1.2/50us,8/20us
Control surge immunity (diff. mode) 0.5 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 4 kV Acc. IEC61000-4-5. 12 Ohm 1.2/50us,8/20us
Control surge immunity (comm. mode) 4 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us

929000708803 Application Info

Approval marks CCC / CE / DALI 2 / Double-insulated Built-In / ENEC / SELV / Type HL / UL Recognized US & Can / WEEE
Ingress Protection classification (IP) 20
Application Outdoor
Mounting Type Built-in

Installation & Application Notes:

1: By factory default, the 1-10V interface is enabled and DALI interface is disabled. These controls are mutually exclusive.

2: Integrated Dynadimmer cannot be overruled by DALI. These controls are mutually exclusive.

3: Driver is for built-in use only and must not be exposed to the elements such as snow, water and ice or to any other chemical agent which can be expected to have an adverse effect on the driver (e.g. corrosive environments). It is the responsibility of both luminaire manufacturer and installer to prevent exposure. Common sense needs to be used in order to define the proper luminaire or application IP rating.

4: Suitable for UL Damp & Dry locations

5: IEC: driver housing is allowed to be connected to accessible insulation Class II luminaire parts. Driver is suitable for insulation Class I and II applications.

6: Standard lead length on all wires: 275 +/- 30mm solid copper. Insulation rating: 105°C/600V.

7: Driver complies with the requirements of UL, CSA, CE, ENEC, CISPR15, FCC 47CFR15 Class A

Also stocked within the Philips Xitanium Xtreme range.

929000708703
929000702202
929000712703

LED drivers in road and street lighting are specialized electrical circuits that convert high-voltage AC mains to stable low-voltage DC, ensuring consistent brightness, preventing flickering, and protecting against power surges in outdoor environments. They improve safety, enable energy-efficient, dimmable operation, and often feature smart control capabilities like NFC or autonomous dimming.

Key aspects of LED drivers in street lighting include:

Constant Current Regulation: These drivers are vital to maintain uniform illumination across roads, preventing flickering, and ensuring consistent, long-term performance.

Environmental Durability: They are typically external, ruggedized components designed for high IP ratings to withstand harsh weather, temperature fluctuations, and potential power surges.

Smart and Efficient Control: Modern street light drivers (e.g.Inventronics OT 1DIM G3) allow for programmed dimming (AstroDIM), saving energy during low-traffic hours.

Maintenance Features: Many drivers now feature NFC technology for rapid, in-field programming and maintenance without opening the fixture.

Common Features & Benefits:

Energy Savings: Up to 65% reduction in power consumption, often supporting net-zero goals.

Durability: High resistance to electrical surges.

Ease of Maintenance: External drivers are easier to replace in elevated fixtures.

Customization: Programmable, allowing for tailored light output for different times of the night.

Key Aspects of LED Drivers in Tunnel Lighting:

Functionality: They convert alternating current (AC) to direct current (DC) and regulate the current to prevent flickering or burnout.

Environmental Durability: Tunnel drivers require high IP ratings to handle humidity, dust, and vibrations.

Dimming Capabilities: They must support dimming protocols (0–10V or PWM) to manage brightness levels based on traffic flow and ambient light, preventing “flicker effects”.

Types: External drivers are often used for better heat management and easier maintenance compared to internal drivers.
Safety & Reliability: Quality drivers are crucial because they directly affect the longevity of the tunnel lighting system.

Significance in Tunnels:

By allowing for adaptive dimming, drivers help transition lighting from bright daylight levels at the entrance to lower levels inside, reducing energy costs and improving driver comfort.

Key Aspects of Industrial LED Drivers:

Types: Constant current drivers (most common for high-power LED arrays) and constant voltage drivers (usually for 12V/24V strips).

Protection: Industrial drivers feature high IP ratings (water/dust resistance) and protection against surges, spikes, and overheating.

Function: They manage the forward voltage, preventing the “thermal runaway” phenomenon where rising temperatures cause LEDs to draw more power, overheat, and fail.

Control: Many industrial drivers support dimming protocols (DALI, 0-10V) and smart controls for energy efficiency.
Selection: Crucial to match the driver’s output voltage and current to the specific LED fixture requirements, ensuring the wattage rating is sufficient.

Why They Are Vital in Industrial Settings:

Unlike residential lighting, industrial lighting operates under extreme conditions. A reliable driver is necessary to maintain stability during power fluctuations and to prevent frequent maintenance in hard-to-reach, high-ceiling installations.

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.