Philips 929000712703 Xitanium 300W 1.5A PROG+GL-RsXt .35-1.5A – Limited Stock

929000712703 Electrical Data

929000712703 General Information

Nominal lifetime 100,000 hour(s)
Lighting Technology LED

929000712703 Operating and Electrical

Mains voltage operation (DC) 168-275 V
Total Harmonic Distortion IEC (Max) 10 %
Power Consumption 330 W
Output Current Ripple (Max) 15 %
Maximum Efficiency at Full Load 93 %
Output Current (Max) 1500 mA
Output Current Tolerance (Max) 5 %
Mains voltage performance (DC) 186-250 V
Power Factor (Fraction) 0.98
Open Circuit Voltage (DC) (Max) 310 V

Input current (AC) 1.48 mA
Input current (DC) 1.8
Inrush Current Peak (Max) 170 A
Inrush Current Peak (Nom) 170 A
Output Power (Max) 300 W
Output Power (Nom) 300 W
Default output current 1000 mA
Inrush Current Width to 50% of Peak 220 µs
Power Factor 100% Load (Max) 0.98
Energy Metering No
Constant Current (CC) True
Constant Voltage (CV) False
Diagnostics True
Output Power (Min) 8 W

Output Current (Min) 100 mA
Output Voltage (Max) 280 V
Output Voltage (Min) 80 V
Number of Products on MCB (16A Type B)(Max) 3
Protection class IEC Safety class I/II
Surge Protection (Common/Differential) 4/4 kV kV

929000712703 Wiring

Hot Wiring No
Control Wire Cross Section (Max) 0.82 mm²
Control Wire Cross Section (Min) 0.82 mm²
Output Wire Cross Section (Max) 0.82 mm²
Output Wire Cross Section (Min) 0.82 mm²
Cable Length From Device to Lamp 10 m
Input wire strip length 8 mm to 12 mm
Input Wire Cross Section (Max) 0.82 mm²
Input Wire Cross Section (Min) 0.82 mm²
Output wire strip length 8 mm to 12 mm

929000712703 System characteristics

Central DC Operation Yes
YellowDot ready No

929000712703 Temperature

T-Case Lifetime (Max) 65 °C
T-Case Maximum (Max) 80 °C
Module Temperature Protection True
Maximum case temperature (in case of failure) 80 °C

929000712703 Mechanical and Housing

Product Length 240.5 mm
Housing R-can 240 x 118 x 75
Overall length 240.5 mm
Overall width 118.3 mm
Overall height 38.2 mm
Dimensions (Height x Width x Depth) 38 x 118 x 241 mm
Ingress protection code IP20 [Finger-protected]
Net Weight (Piece) 1.597 kg

929000712703 Approval and Application

Relative Humidity (Operation) (Max) 90 %
Relative humidity (storage) 5-95 %
Isolation Classification Class I and Class II
Short Circuit Protection Protected
Over Power Protection Protected
Open Circuit Protection Protected
Approval Marks CE marking DALI 2 Double-insulated, Built-In EAC ENEC certificate Type HL UA & UL Recognized WEEE
Corridor Mode False
Output Current Set Options Programmable
Ambient temperature range -40 °C to 55 °C

929000712703 Product Data

Order product name Xitanium 300W 1.5A Prog+ GL-R sXt
Full product name Xitanium 300W 1.5A Prog+ GL-R sXt
Full product code 871869643678300
Order code 929000712703
Material Nr. (12NC) 929000712703
Numerator – Quantity Per Pack 1
EAN/UPC – Product/Case 8718696436783
Numerator – Packs per outer box 4
EAN/UPC – Case 8718696436790

Also stocked within the Xitanium outdoor programmable range

929000702202
929000708803

Outdoor programmable LED drivers are specialized power supplies for exterior lighting—such as street, tunnel, and stadium lights—designed for harsh environments, featuring high IP67/IP66 waterproof ratings, wide temperature resistance (-40 to +90°C), and surge protection. They allow users to adjust output current, dimming, and dim-to-off settings via USB, cable, or NFC, enabling customized energy-saving profiles and improved maintenance.

Key Aspects of Outdoor Programmable LED Drivers:

Programmability & Control: Features include adjustable output current (AOC), adjustable dimming curves, dim-to-off, and Constant Light Output (CLO) to compensate for LED ageing.

Programming Methods: Modern drivers often use NFC (Near Field Communication) for contactless, rapid configuration. Other methods include cable programming or specialized tools like Philips SimpleSet/e-set, which allow configuration without powering the driver.

Environmental Protection: Built with robust, sealed aluminium housings (IP66/IP67) to withstand moisture, dust, and vibration. They offer high surge protection (e.g., 10kV) to handle lightning and electrical volatility.

Energy Efficiency & Features: They maximize energy savings through features like AstroDIM (pre-programmed, timed dimming) and DALI/0-10V dimming interfaces. They typically offer high efficiency, often above 90%.

Key Manufacturers & Series: Common brands include Signify Philips Xitanium, Inventronics, Mean Well ELG series,

LED drivers in road and street lighting are specialized electrical circuits that convert high-voltage AC mains to stable low-voltage DC, ensuring consistent brightness, preventing flickering, and protecting against power surges in outdoor environments. They improve safety, enable energy-efficient, dimmable operation, and often feature smart control capabilities like NFC or autonomous dimming.

Key aspects of LED drivers in street lighting include:

Constant Current Regulation: These drivers are vital to maintain uniform illumination across roads, preventing flickering, and ensuring consistent, long-term performance.

Environmental Durability: They are typically external, ruggedized components designed for high IP ratings to withstand harsh weather, temperature fluctuations, and potential power surges.

Smart and Efficient Control: Modern street light drivers (e.g.Inventronics OT 1DIM G3) allow for programmed dimming (AstroDIM), saving energy during low-traffic hours.

Maintenance Features: Many drivers now feature NFC technology for rapid, in-field programming and maintenance without opening the fixture.

Common Features & Benefits:

Energy Savings: Up to 65% reduction in power consumption, often supporting net-zero goals.

Durability: High resistance to electrical surges.

Ease of Maintenance: External drivers are easier to replace in elevated fixtures.

Customization: Programmable, allowing for tailored light output for different times of the night.

Key Aspects of LED Drivers in Tunnel Lighting:

Functionality: They convert alternating current (AC) to direct current (DC) and regulate the current to prevent flickering or burnout.

Environmental Durability: Tunnel drivers require high IP ratings to handle humidity, dust, and vibrations.

Dimming Capabilities: They must support dimming protocols (0–10V or PWM) to manage brightness levels based on traffic flow and ambient light, preventing “flicker effects”.

Types: External drivers are often used for better heat management and easier maintenance compared to internal drivers.
Safety & Reliability: Quality drivers are crucial because they directly affect the longevity of the tunnel lighting system.

Significance in Tunnels:

By allowing for adaptive dimming, drivers help transition lighting from bright daylight levels at the entrance to lower levels inside, reducing energy costs and improving driver comfort.

Key Aspects of Industrial LED Drivers:

Types: Constant current drivers (most common for high-power LED arrays) and constant voltage drivers (usually for 12V/24V strips).

Protection: Industrial drivers feature high IP ratings (water/dust resistance) and protection against surges, spikes, and overheating.

Function: They manage the forward voltage, preventing the “thermal runaway” phenomenon where rising temperatures cause LEDs to draw more power, overheat, and fail.

Control: Many industrial drivers support dimming protocols (DALI, 0-10V) and smart controls for energy efficiency.
Selection: Crucial to match the driver’s output voltage and current to the specific LED fixture requirements, ensuring the wattage rating is sufficient.

Why They Are Vital in Industrial Settings:

Unlike residential lighting, industrial lighting operates under extreme conditions. A reliable driver is necessary to maintain stability during power fluctuations and to prevent frequent maintenance in hard-to-reach, high-ceiling installations.

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.