Philips 929000863703 25W LH 0.3-1A 36V TD/Is 230V – Limited Stock

929000863703 General Information

929000863703 Electrical input data

Rated input voltage range 220…240 Vac Performance range
Rated input voltage 230 Vac
Rated input frequency range 50…60 Hz Performance range
Rated input current 0.2 A @ rated output power @ rated input voltage
Rated input power 29 W @ rated output power @ rated input voltage

Power factor 0.9 @ rated output power @ rated input voltage
Total harmonic distortion 20 % @ rated output power @ rated input voltage
Efficiency ≥ 87 % @ rated output power @ rated input voltage
Rated input voltage DC range 186…250 Vdc Performance range
Input voltage AC range 202…254 Vac Operational range
Input frequency AC range 47.5…64 Hz Operational range
Input voltage DC range 168…275 Vdc Operational range
Isolation input to output SELV

929000863703 Electrical output data

Regulation method Constant Current
Output voltage 18…36 Vdc
Output voltage max. 50 V Maximum output voltage (rms)
Output current 0.3…1 A
Output current tolerance ± 5 %
Output current ripple LF ≤ 20 % Ripple = peak / average, < 3kHz
Output power 5…26 W

929000863703 Electrical data controls input

Control method DALI, Touch & Dim (TD)
Dimming range 1…100 % Default range
Isolation controls input to output Basic acc. IEC61347-1

Wiring and Connections

Input wire cross-section 0.5…1.5 / 20…16 mm2 / AWG WAGO250 (pitch 3.5 mm), solid / stranded wire
Input wire strip length 8.5…9.5 mm
Output wire cross-section 0.08…0.33 / 28…22 mm2/ AWG JST, solid wire
Output wire cross-section 0.5…1.5 / 20…16 mm2/ AWG WAGO250 (pitch 3.5 mm), solid / stranded wire
Output wire strip length 8.5…9.5 mm Maximum cable length 0.5 m Total length of wiring including LED module, one way

Insulation

Input Output SELV
Output Input SELV

929000863703 Dimensions and Weight

Length (A1) 150 mm
Mounting hole distance (A2) 114 mm
Width (B1) 46 mm
Height (C1) 32 mm
Mounting hole diameter (D1) 4.2 mm
Weight 150 gram

929000863703 Logistical data

Product name Xitanium 25W LH 0.3-1A 36V TD/Is 230V
EOC 871829170803200
Logistic code 12NC 9290 008 63703
EAN1 (GTIN) 8718291708032
EAN3 8718291708049
Pieces per box 10

Operational temperatures and humidity

Ambient temperature -20…+65 ºC Higher ambient temperature allowed as long as Tcase-max is not exceeded
Tcase-max 90 ºC Maximum temperature measured at Tcase-point
Tcase-life 80 ºC Measured at Tcase-point
Maximum housing temperature 110 ºC In case of a failure, inherent by design
Relative humidity 10…90 % Non-condensing

Lifetime

Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10%

Storage temperature and humidity

Ambient temperature -25…+85 ºC
Relative humidity 5…95 % Non-condensing

929000863703 Programmable features

Set Adjustable Output Current (AOC) Programmable, Rset2 700 mA
LED Module Temperature Protection (MTP) Yes OFF
Constant Light Output (CLO) Yes OFF
Touch & Dim (TD) Yes ON
Corridor Mode Yes ON Default: T1=55s, T2=12s, T3=30min
DC emergency (DCemDim) Yes ON Current output decreased to 15%

9290008637 Features

Open load protection Yes Automatic recovering
Short circuit protection Yes Automatic recovering
Over power protection Yes Automatic recovering
Hot wiring Yes
Suitable for fixtures with protection class II per IEC60598
Energy metering No
Diagnostics No

Inrush current

Inrush current Ipeak 20 A Input voltage 230V
Inrush current Twidth 150 µs Input voltage 230V, measured at 50% Ipeak
Drivers / MCB 16A type B ≤ 30 pcs Indicative value

Driver touch current / protective conductor current

Typical Touch Current (ins. Class II) 0.7 mA peak Acc. IEC61347-1. LED module contribution not included

Surge immunity

Mains surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Control surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us

Application Info

Approval marks BIS / CCC / CE / EAC / EL / ENEC / RCM / SELV / UA
Ingress Protection classification (IP) 20
Application Indoor Point
Mounting Type Built-in / Independent

Module Temperature Protection

Advised NTC type Vishay 15Kohm +/- 2% 238161554153
Murata NCP15XW153E03RC NCP15XW153E03RC With 390Ω in series
NTC resistance threshold 2966 Ω Start limiting output current
Corresponding temperature 70 ºC With advised type 238161554153

Also stocked within the Xitanium LED drivers – spot- and downlight SELV range

929001404306

DALI (Digital Addressable Lighting Interface) constant current LED drivers are intelligent, addressable power supplies designed for precise control, dimming, and monitoring of LED lighting in commercial and high-end residential systems. They enable individual or grouped control of fixtures via a two-way digital signal, offering flicker-free dimming from 100% down to 0.1% or 1%.

Key Features and Benefits

Individual Addressing: Unlike traditional analog dimming, DALI allows each driver to have a unique address, enabling independent control over every light fitting.

Constant Current (CC): These drivers provide a fixed, stable current (e.g., 250mA, 350mA, 700mA) suitable for LED boards, with adjustable settings often available via DIP switches or NFC.

Two-Way Communication: DALI systems can query, monitor, and configure drivers, allowing for status reporting and fault detection.

Dimming Capabilities: Offers smooth, deep dimming to 0.1% for superior ambiance, crucial for applications like theater or high-end residential.

Compatibility & Protocols: Supports DALI-1 and the advanced DALI-2 (IEC 62386) standards, ensuring interoperability with various control systems.

Configuration: Many modern drivers allow setting output current, fade times, and max/min brightness via NFC tools.

Technical Specifications

Power Output: Ranges typically from 10W to over 300W.

Voltage: Wide range, often 110-277VAC input, with varying DC output voltage depending on the load.

Safety & Protection: Includes short circuit, over-current, and over-temperature protection.

Efficiency: Typically features high power factor correction (<0.95) and low power consumption in standby (<0.5W).

Typical Applications

• Smart building automation.
• Large-scale commercial and office lighting.
• Architectural and smart home, lighting control.
• Outdoor LED fixtures (IP65/IP67 rated models).

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.