LLS/6

Liteplan D2N/1/TP40/R Two-Part DALI-2 Addressable, TUV Certified

D2N/1/TP40/R

SKU:D2N/1/TP40/R

Liteplan D2N/1/TP40/R Two-Part DALI-2 Addressable

A 3-hour DALI-2 self-test emergency lighting conversion kit, designed to suit an extremely wide range of LED types and circuits. The D2N/1/TP40/R automatically adjust the output LED current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration.

£55.00
Ex.VAT
Inc.VAT£66.00

Quantity Price (each)
1 £55.00
5 £54.70
10+ £54.10

Description

Liteplan D2N/1/TP40/R

A 3-hour DALI-2 self-test emergency lighting conversion kit, designed to suit an extremely wide range of LED types and circuits. The D2N/1/TP40/R automatically adjust the output LED current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration.

The D2N/1/TP40/R will operate LED loads between 6-60V forward. This product is fully DALI-2 compliant and in keeping with the DALI-2 Standard, if the module is commissioned without a DALI control system present, the unit will revert to standalone self-test, indicating its faults via the charge LED.

This unit is designed to be mounted adjacent to the fitting in the ceiling void where there is insufficient room inside the luminaire to house the control gear. The packs will pass through a 40mm aperture. The D2N range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.

Specifications

TÜV Tested and Certified
DiiA Registered DALI-2 Device
2-pole Changeover Relay

Additional 3rd Pole Relay for Driver Protection
Deep Discharge Protection
Intelligent, Low Energy, Charging Circuit

Extra Long Life LiFePO4 Cells
Two Part Remote Gear for 40mm Apertures

Strain Relief Module for Remote Mounting
D2N/1 – Average Emergency Output of 2.2W
LiFePO4 Automatic Battery Protection and Recovery

https://www.liteplan.com/product/d2n-1-tp40-r/

D2N/1/TP40/R

I Rated 352mA – 40mA
P Rated 2.2W
Voltage Range 6-55V

Battery Discharge Current 950mA
Mains Supply 230-240V AC 50/60Hz
Power Rating – Charging 2.8W 17mA λ = 0.70

Power Rating – Standby 1.4W 12mA λ = 0.48
Charge Current 225mA nominal
Recharge Period 24-hours

Battery Pack 3.2V 3.8Ah LiFePO4
Battery Cut Off (DDP) 2.5V
Ambient Temperature (Ta) Module and Battery 5°C to 35°C

Case Temperature (Tc) Battery 5 to 55°C, Module 5 to 70°C
Dimensions Module – 231mm x 33.6mm x 22.5mm FC = 224mm

Should you just require the battery from the kit; see our 1/LP38/PT/MS 3.2V 3.8Ah Encased Lithium Iron Phosphate Pack.

Liteplan are the largest, privately owned emergency lighting component supplier to the UK market, whilst also shipping their products to a worldwide customer base. Established in 1994 by the late Bill Green, the company was successfully run by Bill’s right hand man, Peter Ray for many years. Peter retired in 2022 and Liteplan is now run by the next generation of Bill’s family with his son, Steve Green at the helm as Managing Director and Steve’s brother-in-law, Jonathan Bell as Director of Operations.

Their Business Development Director, Adrian Spicer is a long standing and well respected figure in the world of emergency lighting. His knowledge and stature within the industry are invaluable to them.

Liteplan’s wealth of knowledge extends many years. Their Technical Manager, David French BSc. sits on the committee at ICEL and works closely with The LIA. Their Product R&D Manager, Osman Özgür Rakibet, PhD, takes control of Liteplan’s product road map. His knowledge is steering their evolution and maintaining their position as the innovators of the emergency lighting sector.

Many of Liteplan’s engineers have worked with the company for over 20 years, constantly striving to progress through the our ever evolving CPD scheme to stay at the forefront of the ever changing world of legislation.

Liteplan proudly design all of their products in-house, making product evolution a constant and seamless process. They employ over 60 local personnel, many of whom have been with them for the majority of their existence and they also pride themselves on their unrivalled delivery satisfaction level.

Their 40,000 square foot factory enables them to carry a huge level of stock, thereby fulfilling even the largest of orders with haste. They recently acquired additional warehousing adjacent to their headquarters near London’s M25. This will fuel Liteplan’s global expansion plans for many years to come.

Need to know more about Liteplan D2N/1/TP40/R Two-Part DALI-2 Addressable, TUV Certified?

You can email us at: sales@ledparts.co.uk or alternatively you can request a callback by completing the form below and we'll get back to you as soon as possible.







    You may also be looking for...