Liteplan NED/3 – Emergency Module
NED/3
Liteplan NED/3
The NED/3 is obsolete, and has been superseded by the NLP/1-K, which consists of module and replacement LiPO4 battery which is required.
£53.41
Ex.VAT Inc.VAT£64.09
Less Than 10 Available!
Description
Liteplan NED/3
The NED/3 range is supplied as a conversion kit for integral use within a luminaire. If required, it can be provided within a suitable remote enclosure where space inside the fitting is limited.
A 3 hour emergency lighting conversion kit which operates with high temperature NiCd batteries. The unit is designed to suit an extremely wide range of LED types and circuits. The NED/3
automatically adjusts the output LED current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration.
Please see separate datasheets for Remote Enclosure details
NED/3 Key Features
- Awarded BSI’s Prestigious Kitemark
- Deep discharge protection
- Automatically Provides Maximum BLF to Load
- High Temperature NiCd Batteries
- Converts LED Loads from 6-80 Volts
- Can be Provided in Various Remote Enclosures
- Higher Output Versions Available
NED/3 Technical Data
Mains Supply 230-240V AC 50/60 Hz
Power Rating 22mA λ = 0.85
Duration 3 Hours
Recharge Period 24-Hours
Battery Size & Type 3-CD45/S/AS
Charge Current 200mA
Battery Cut-Off Voltage 3V
Kit Weight 0.69Kg (M-0.29 B-0.40)
Max Ta and Tc Ta – 50 °C – Tc – 70 °C
Max Battery temperature 55 °C
Battery Discharge Current 1000mA nominal
Discharge Voltage Limit 2.5 Volts
Ingress Protection IP20
Terminal – Screw & Push 1.0mm² – 1.5 mm²
Module Dimensions (LxWxH) 165x 45 x 29 (f/c 155mm)
Battery Stick Dimensions (LxØ) 220 x 38 (f/c 205mm)
Top view
Side view
Emergency LED conversion kits (or emergency power packs) transform standard LED light fittings into emergency luminaires, providing 1–3 hours of illumination during power failures. These kits consist of a battery, inverter, and LED indicator, making them essential for compliance with safety regulations. They are compatible with most LED panels and downlights.
Key Features and Benefits
Safety Compliance: Ensures lighting remains operational during power outages, crucial for emergency evacuations.
Extended Backup: Typically provides 3 hours of illumination, with some offering 1.5 hours at higher output.
Compatibility: Suitable for a wide range of LED drivers and modules (dimmable and non-dimmable).
Battery Types: Often utilize modern LiFePO4 batteries for better performance and longer life, though Ni-Cd is also common.
Versatility: Available for various fittings, including panels, downlights, and linear lights.
Types of Conversion Kits
Maintained: The LED operates normally via standard power but switches to battery power during mains failure.
Non-Maintained: The LED remains off until a power failure occurs.
Self-Test: Automatically performs required emergency lighting tests.
Components and Installation
Inverter/Driver: Switches the light to battery power.
Battery Pack: Provides emergency power (usually 2–3 hours).
Indicator LED: A green light that shows the battery is charging and functioning correctly.
These kits are often installed in commercial buildings, offices, and escape routes to comply with regulations, with many offering simple installation to existing light fixtures.
Liteplan are the largest, privately owned emergency lighting component supplier to the UK market, whilst also shipping their products to a worldwide customer base. Established in 1994 by the late Bill Green, the company was successfully run by Bill’s right hand man, Peter Ray for many years. Peter retired in 2022 and Liteplan is now run by the next generation of Bill’s family with his son, Steve Green at the helm as Managing Director and Steve’s brother-in-law, Jonathan Bell as Director of Operations.
Their Business Development Director, Adrian Spicer is a long standing and well respected figure in the world of emergency lighting. His knowledge and stature within the industry are invaluable to them.
Liteplan’s wealth of knowledge extends many years. Their Technical Manager, David French BSc. sits on the committee at ICEL and works closely with The LIA. Their Product R&D Manager, Osman Özgür Rakibet, PhD, takes control of Liteplan’s product road map. His knowledge is steering their evolution and maintaining their position as the innovators of the emergency lighting sector.
Many of Liteplan’s engineers have worked with the company for over 20 years, constantly striving to progress through the our ever evolving CPD scheme to stay at the forefront of the ever changing world of legislation.
Liteplan proudly design all of their products in-house, making product evolution a constant and seamless process. They employ over 60 local personnel, many of whom have been with them for the majority of their existence and they also pride themselves on their unrivalled delivery satisfaction level.
Their 40,000 square foot factory enables them to carry a huge level of stock, thereby fulfilling even the largest of orders with haste. They recently acquired additional warehousing adjacent to their headquarters near London’s M25. This will fuel Liteplan’s global expansion plans for many years to come.
Need to know more about Liteplan NED/3 – Emergency Module?
You can email us at: sales@ledparts.co.uk or alternatively you can request a callback by completing the form below and we'll get back to you as soon as possible.














