ELP OM458/TI – Fluorescent Emergency Module That is Designed To Operate a Range of Specific Lamps From Wattages Between 4 and 58W

Emergency Lighting Products OM458/TI

OM458/TI operates the following lamps, please check the attached datasheet to confirm the BLF is acceptable.

8W T5, 9W TCSEL,11W TCS,13W T5, 18W T8, 36W T8, 36W TCF, 38W 2D, 40W TCL, 50W T8, 55W TCL & 58W T8.

The OM458/TI requires a NICD 4AH 4.8V battery to operate for 3-hours in emergency; see our 4DH4-0L4 for suitability to the application.

Fluorescent emergency modules are critical lighting components that convert standard, mains-powered fluorescent fixtures into emergency lights by providing a, typically, 3-hour battery backup during power failures. They consist of an inverter, charger, and high-temperature battery, allowing for either “maintained” (on/off) or “non-maintained” (only on during failures) operation.

Key Aspects of Fluorescent Emergency Modules:

Functionality: Upon mains failure, the module switches the lamp to battery power, providing DC power to the lamp.

Compatibility: They work with various T5, T8, and T12 linear fluorescent tubes, as well as 4-pin compact lamps (10W-70W).

Safety Compliance: These modules generally adhere to standards like EN61347 and EN60925.

Battery Type: They often use Nickel-Cadmium (NiCd) batteries, such as 4.8V 4AH sticks.

Components: The units include an inverter to convert DC to AC for the lamp, and a charger to keep the battery ready.

Installation: Designed for internal mounting within modern 220-240V luminaires.

Established in 1995 and based in the South-East, we are a team of experts with unrivalled knowledge and experience in safety lighting products, devices, and electronic circuits.

We hold a vast range of stock onsite which means no long lead times for your commercial project. Therefore, if we have the products in stock that you need, we aim to get them to you the very next day.

We don’t just sell products we also develop them in-house. We specialise in manufacturing emergency lighting equipment and have vast engineering capabilities, so we can supply you with exactly what you need while meeting legal requirements.

We also customise existing products and create bespoke orders as part of our assembly and emergency lighting conversion work. Our technical support team is always available to give respected advice and support.

Our offering includes comprehensive testing to ensure all products are fully functioning and compliant with current regulations when they leave our site.