Inventronics OTi DALI 15/220-240/1A0 NFC – OPTOTRONIC Intelligent – DALI NFC

OTI DALI 15/220-240/1A0 NFC Technical Data

OTi DALI 15/220-240/1A0 NFC Electrical Data

Nominal input voltage 220-240 V
Mains frequency 0/50/60 Hz
Input voltage AC 198-264 V 1)
Input voltage DC 176-276 V
Total harmonic distortion < 10 % 2)
Power factor λ 0.38C…0.95
Efficiency in full-load 88 % 3)
Device power loss 2.4 W
Networked standby power ≤0.27 W 3)

Inrush current 5 A 4)
Max. ECG no. on circuit breaker 10 A (B) 82
Max. ECG no. on circuit breaker 16 A (B) 130
Surge capability (L-N) 1 kV
Surge capability (L/N-Ground) 2 kV
Protective conductor current not relevant
Nominal output voltage 7.5-54 V 5)
U-OUT (working voltage) 60 V
Nominal output current 150-1050 mA 6)
Default output current 350 mA

Output current tolerance ±3 %
Output ripple current (100 Hz) < 2 % 7)
Output PSTLM ≤1
Output SVM ≤0.4
Nominal output power 18 W 8)
Maximum output power 18 W
Galvanic isolation primary/secondary SELV
Galvanic isolation DALI/mains Basic
Galvanic isolation DALI/output SELV

OTI DALI 15/220-240/1A0 NFC Dimensions & weight

Product weight 100.00 g
Length 95.0 mm
Width 53.0 mm
Height 30.0 mm
Mounting hole spacing, length not relevant mm
Mounting hole spacing, width not relevant mm
Cable cross-section, input side 0.2…1.5 mm² 1)
Cable cross-section, output side 0.2…1.5 mm² 1)
Wire preparation length, input side 8.0…9.0 mm
Wire preparation length, output side 8.0…9.0 mm
Cable/wire length, output side 2000 mm

OTI DALI 15/220-240/1A0 NFC Diagram

OTi DALI 15/220-240/1A0 NFC Colours & materials

Casing material Plastic
Product colour White

Temperatures & operating conditions

Ambient temperature range -20…+50 °C
Maximum temperature at tc test point 80 °C 1)
Max.housing temperature in case of fault 110 °C
Temperature range at storage -40…+85 °C
Permitted rel. humidity during operation 5…85 %

Lifespan

ECG lifetime 50000 h / 100000 h 1)

Additional product data

Predecessor EAN 4052899548190

OTI DALI 15/220-240/1A0 NFC Capabilities

Programming interface DALI, NFC
Control interface DALI-2
Dimmable Yes
Dimming interface DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range 1…100 %
Dimming method Amplitude Modulation
DALI-2 Diagnostic Data Yes 1)
DALI-2 Energy Data Yes 2)
Constant lumen function Programmable
Max. cable length to lamp/LED module 2.0 m 3)
Suitable for fixtures with prot. class I / II
Suitable for emergency lighting Yes
Type of connection, input side Push terminal
Type of connection, output side Push terminal
Suitable for through-wiring No
Number of channels 1
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
Intended for no-load operation No
No-load proof Yes

OTI DALI 15/220-240/1A0 NFC Programming

Programming device DALI / NFC
Tuner4TRONIC Yes
Tuner4TRONIC Field App Yes

OTi DALI 15/220-240/1A0 NFC Programmable features

DALI Settings Yes
DALI-2 Luminaire Data Yes 1)
TouchDIM + Sensor Yes
Corridor Functionality Yes
Dim to Dark Yes
Soft Switch Off Yes
Tuning Factor Yes
Configuration Lock Yes
Driver Guard Yes
Emergency Mode Yes

Certificates & standards

Approval marks – approval CE / EL / ENEC 10 / VDE-EMC / DALI-2
Standards Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to
EN 61547 / Acc. to EN 61000-3-2 / Acc. to EN 62384 / Acc. to EN 62386 /
Acc. to IEC 62386-101:Ed2 / Acc. to IEC 62386-102:Ed2 / Acc. to IEC
62386-207:Ed1
Type of protection IP20

Logistical data

Commodity code 85044083900

Environmental information
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration 26-09-2024
Primary Article Identifier 4062172061766
Declaration No. in SCIP database In work
SCIP_STATUS In work

DALI Constant Current NFC LED drivers are advanced, addressable lighting control units that power LED fixtures (300mA–850mA+) and support DALI-2/DT6/DT8 protocols for smart building automation. NFC (Near Field Communication) technology allows precise, wireless configuration of current, DALI addresses, and dimming curves via a smartphone app, enabling, in some cases, ultra-deep dimming down to 0.01%.

Key Features and Benefits

NFC Programming: Allows for setting output current in 0.1mA or 1mA steps, reducing inventory needs as one driver fits multiple fixtures.

DALI-2 Compatibility: Compatible with IEC62386-101/102/207 standards, supporting DALI DT6 (single color) or DT8 (tunable white).

Performance: Features flicker-free, smooth dimming (100% down to 0.01% or 1%).

Protection & Lifetime: Includes automatic recovery for short-circuit, overload, and over-temperature protection. They often feature long lifespans (up to 100,000 hours).

Functionality: Supports Constant Lumen Output (CLO), corridor functionality (CD), and configurable fade times.

Application and Usage

Industries: Suitable for indoor, office, and commercial lighting, including downlights, spotlights, and panels.

Installation: Often feature compact designs with built-in cable clamps, suitable for Class I, II, or III fixtures.

Setup: Configuration is typically done by scanning the driver with an app (e.g., SR NFC tool) to adjust parameters, even without mains power.

Established in 2007, Inventronics is a premier worldwide producer of an extensive range of lighting products, including LED drivers, sensors, control systems, and LED modules. Our cutting-edge, reliable, and durable solutions are designed to meet all major international safety and performance standards.

Our design teams, situated at our main office in Hangzhou, China, as well as regional hubs in Garching, Germany, Treviso, Italy, Delhi, India, and Shenzhen, China concentrate on developing low, mid, and high-power drivers, network control systems, and accessory products.

Manufacturing is carried out at our cutting-edge Science and Technology Park in Tonglu, China, along with additional facilities in Mexico, Italy, and India. We welcome you to tour our factories and experience our unwavering commitment to quality firsthand.

Our mission is to provide superior products, exceptional technical support, and outstanding customer service to our clients. We also strive to generate value for our customers by working to enhance and prolong the return on investment for solid-state lighting systems.

Inventronics’ exclusive focus on LED drivers and lighting components empowers us to stay at the forefront of emerging technologies, laying the foundation for the upcoming generation of LED lighting solutions. Our areas of expertise encompass a committed R&D team of numerous professionals, an array of patents, and a diverse product portfolio tailored to various applications.

We offer customized solutions for our clients, operate several safety labs to accelerate product launches, and adhere to outstanding product development and design qualification processes. Our internal manufacturing capabilities feature a substantial monthly production capacity, while we also perform thorough product testing and continuous reliability evaluations to guarantee the highest quality standards.

Global Presence

Inventronics is a global organization with a headquarters in China and additional offices across the world. Our strategically located warehouses, combined with our extensive global partner network, enable us to efficiently serve customers worldwide.

Technical Support

Inventronics boasts a dedicated in-house technical support team and customer service team to address any questions or concerns you may have. In addition, our regional lighting representatives are available for in-person consultations.

Global Partners

Inventronics is dedicated to forging partnerships that enable us to create exceptional products for our clients. Our customer-centric approach drives us to develop reliable, user-friendly, and easily installable and upgradeable products. By offering industry-tailored solutions designed to excel in key market applications and focusing on specific industry needs and capabilities, we deliver the utmost value. Our drivers have been successfully implemented in numerous iconic landmarks across the globe.