Eaton Menvier ZBQX Fluorescent Emergency Module 11 – 36W – Limited Stock

ZBQX Technical Information

The  ZBQX emergency module is designed to operate a range of specific lamps from wattages between 11 and 36W.

If the battery is required for the ZBQX; see our 3DH4-0L4 & 3DH4-0L3 for suitability to the application.

Dimensions: 216mm x 39mm x 30mm

Fixing

The conversion kit is best installed inside the luminaire, this may require the existing components, e.g. ballast, starter and PFC capacitor, to be repositioned. The following precautions should be observed:

Locate the converter as close as possible to the ballast to keep wiring short, but far enough away to prevent overheating.

Locate the battery in the coolest part of the luminaire, remote from heat sources such as the mains ballast and the lamp ends.

Locate the LED indicator in the luminaire where it will be clearly visible during normal operation. Drill a 6.35mm (0.25″) to mount the LED.

Ensure the layout does not interfere with the essential safety features of the luminaire such as Earthing and shrouding.

Do not obstruct cable entries, mounting points, covers or light controllers.

Fluorescent emergency modules are critical lighting components that convert standard, mains-powered fluorescent fixtures into emergency lights by providing a, typically, 3-hour battery backup during power failures. They consist of an inverter, charger, and high-temperature battery, allowing for either “maintained” (on/off) or “non-maintained” (only on during failures) operation.

Key Aspects of Fluorescent Emergency Modules:

Functionality: Upon mains failure, the module switches the lamp to battery power, providing DC power to the lamp.

Compatibility: They work with various T5, T8, and T12 linear fluorescent tubes, as well as 4-pin compact lamps (10W-70W).

Safety Compliance: These modules generally adhere to standards like EN61347 and EN60925.

Battery Type: They often use Nickel-Cadmium (NiCd) batteries, such as 4.8V 4AH sticks.

Components: The units include an inverter to convert DC to AC for the lamp, and a charger to keep the battery ready.

Installation: Designed for internal mounting within modern 220-240V luminaires.

Eaton Lighting (part of the global power management giant Eaton) provides comprehensive indoor/outdoor lighting and controls, specializing in energy-efficient LED solutions for commercial, industrial, and automotive sectors, with strong expertise in life safety/emergency lighting, offering design, installation, and maintenance services alongside products like emergency lights, industrial fixtures, and automotive components.

They focus on smart, sustainable designs, using LED tech for superior performance, lower energy use, and longer life, backed by extensive testing and support.

Key Areas & Products

Emergency & Life Safety: Market-leading mains and emergency lighting systems, exit signs, and controls for buildings, with ISO 9001 certification and third-party approvals.

Commercial & Industrial: High-performance LED fixtures, hazardous area lighting (Champ series), and control systems for energy savings.

Automotive Lighting: Electronic components (LEDs, sensors, power protection) for advanced automotive lighting systems (headlights, DRLs).

Controls & Systems: Smart lighting controls, energy management solutions, and integration with backup power.