28000666

Tridonic 28001253 LCA 100W 24V one4all SC PRE – Huge UK Based Stock

28001253

SKU:28001253

Tridonic 28001253 LCA 100W 24V one4all SC PRE

NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can be either used built-in or independent with clip-on strain relief (see data sheet chapter: 1. Standards)
The strain relief is included in both packaging variants. In the single packaging (SP) each Driver has also an individual packaging

£73.80
Ex.VAT
Inc.VAT£88.56

Quantity Price (each)
1 £73.80
5 £72.30
10+ £69.40

Description

Tridonic 28001253 LCA 100W 24V one4all SC PR

NEW: lumDATA (Luminaire data, Energy reporting and Diagnostics & Maintenance)
Dimmable 24 V constant voltage LED driver for flexible constant voltage strips
Can be either used built-in or independent with clip-on strain relief (see data sheet chapter: 1. Standards)

The strain relief is included
One4all interface and ready2mains enable different dimming options
Dimming range 1 to 100 %

No additional external dimmer is needed
Suitable for emergency escape lighting systems acc. to EN 50172
Nominal lifetime up to 50,000 h

28001253 Typical applications

Cove lighting, facade accent lighting, ceiling integration

28001253 Technical details

24 V, 100 W
Small design (295 x 43 x 30 mm) with stretched-compact strain relief
Small cross section
Push terminals for simple wiring
Output terminals (+/–) equipped twice for more flexibility in the application

28001253 Interfaces

one4all (DALI DT 6, DSI, switchDIM, corridorFUNCTION)
ready2mains (configuration and dimming via mains)
Terminal blocks: 45° push terminals

System solution

Tridonic LLE-FLEX ADV 600, 1,200, 1,800 lm/m
Tridonic LLE-FLEX EXC 600, 1,200, 1,800, 2,500 lm/m
In connection with Flex accessories wire to PCB plug
Test the function of third party light sources before use at low dimming levels to ensure the dimming function works perfectly

https://www.tridonic.com/en/int/product/28001253?tab=0

28001253 Common Data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V

Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h

Typ. rated current (at 230 V, 50 Hz, full load) 1 468 mA
Typ. current (220 V, 0 Hz, full load, 15 % dimming level) 93 mA
Leakage current (at 230 V, 50 Hz, full load) 1 < 260 μA
Max. input power 111 W

Typ. efficiency (at 230 V, 50 Hz, full load) 93 %
λ (at 230 V, 50 Hz, full load) 1 0.99
Typ. power consumption on stand-by 2 < 0.2 W

Typ. input current in no-load operation 40.4 mA
Typ. input power in no-load operation 2 2.6 W
In-rush current (peak / duration) 43 A / 280 μs

THD (at 230 V, 50 Hz, full load) 1 < 5.7 %
Output P_ST_LM (at full load) ≤ 1

Output SVM (at full load) ≤ 0.4
Starting time (at 230 V, 50 Hz, full load) 1 < 0.35 s
Starting time (DC mode) < 0.32 s

Switchover time (AC/DC) 3 < 0.3 s
Turn off time (at 230 V, 50 Hz, full load) < 20 ms
Output voltage tolerance ± 1 V
Output LF voltage ripple (< 120 Hz) ± 5 %

Max. output voltage (U-OUT) 60 V
PWM frequency ≥ 1 kHz
Dimming range 1 – 100 %
Mains surge capability (between L – N) 1 kV

Mains surge capability (between L/N – PE) 2 kV
Type of protection IP20
Lifetime up to 50,000 h
Dimensions L x W x H 295 x 43 x 29.8 mm

For DALI 2 compatibility see our Tridonic 28004432 LC 100W 24V one4all NF SC EXC2.

28001253 Wiring

Mains supply wires

For wiring use stranded wire with ferrules or solid wire from 0.2 – 1.5 mm².
For perfect function of the push-wire terminals (WAGO 250) the strip length should be 8.5 – 9.5 mm.
Use one wire for each terminal connector only.

Secondary wires (LED module)

For wiring use stranded wire with ferrules or solid wire from 0.2 – 1.5 mm² (24AWG – 16AWG).
For perfect function of the push-wire terminals (Phoenix SPTAF 1/4-5,0-IL) the strip length should be 8 mm.
Use one wire for each terminal connector only.

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.

Need to know more about Tridonic 28001253 LCA 100W 24V one4all SC PRE – Huge UK Based Stock?

You can email us at: sales@ledparts.co.uk or alternatively you can request a callback by completing the form below and we'll get back to you as soon as possible.







    You may also be looking for...