Tridonic 28002497 LC 42W 700/900/1050mA flexC SR ADV – Limited Stock
28002497
Tridonic 28002497 LC 42W 700/900/1050mA flexC SR ADV
Independent fixed output LED driver
For luminaires of protection class I and protection class II
For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
Temperature protection as per EN 61347-2-13 C5e
Adjustable output current between 700, 900 & 1,050 mA
Max. output power 42 W
Up to 88 % efficiency
£20.96
Ex.VAT Inc.VAT£25.15
Description
Tridonic 28002497 LC 42W 700/900/1050mA flexC SR ADV
28002497 Description
Independent fixed output LED driver
For luminaires of protection class I and protection class II
For luminaires with M and MM as per EN 60598, VDE 0710 and VDE 0711
Temperature protection as per EN 61347-2-13 C5e
Adjustable output current between 700, 900 and 1,050 mA
Max. output power 42 W
Up to 88 % efficiency
28002497 Housing properties
Casing: polycarbonate, white
Type of protection IP20
28002497 Interfaces
Input terminals: 0° screw terminals
Output terminals: 45° push terminals
28002497 Functions
Overload protection
Short-circuit protection
No-load protection
Overtemperature protection
Burst protection voltage 1 kV
Burst protection voltage 1 kV (L to N)
Surge protection voltage 2 kV (L/N to earth)
Typical applications for the 28002497
For spot light and downlight in retail and hospitality applications
For panel light and area light in office and education application
28002497 Common Data
Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Max. input current (at 230 V, 50 Hz, full load) 0.23 A
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
Max. input power 1 49 W
Typ. power consumption (at 230 V, 50 Hz, full load) 1 48 W
Min. output power 21 W
Max. output power 42 W
Typ. efficiency (at 230 V, 50 Hz, full load) 1 88 %
λ (at 230 V, 50 Hz, full load) 1 0.95
Output current tolerance 23 ± 10 %
Max. output current peak 4 ≤ output current + 20 %
Max. output voltage (U-OUT) 60 V
THD (at 230 V, 50 Hz, full load) < 10 %
Output LF current ripple (< 120 Hz) ± 5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Starting time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Hold on time at power failure (output) 0 s
Ambient temperature ta (at lifetime 50,000 h) 40 °C
Storage temperature ts -40 … +80 °C
Lifetime up to 50,000 h
28002497 Dimensions L x W x H 159.4 x 82 x 34 mm
28002497 Wiring
Wiring type and cross section
For wiring use stranded wire with ferrules or solid wire.
For perfect function of the cage clamp terminals the strip length should be 4 – 5 mm for the input terminal.
The max. torque at the clamping screw (M3) is 0.2 Nm.
28002497 Wiring guidelines
• All connections must be kept as short as possible to ensure good EMI behaviour.
• Mains leads should be kept apart from LED driver and other leads (ideally 5 – 10 cm distance)
• Max. length of output wires is 2 m.
• To comply with the EMC regulations run the secondary wires (LED module) in parallel.
• Incorrect wiring can damage LED modules.
• To avoid the damage of the Driver, the wiring must be protected against short circuits to earth (sharp edged metal parts, metal cable clips, louver, etc.).
• The current selection has to be installed in the accordance to the requirement of low voltage installation.
Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.
Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.
In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.
Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.
Need to know more about Tridonic 28002497 LC 42W 700/900/1050mA flexC SR ADV – Limited Stock?
You can email us at: sales@ledparts.co.uk or alternatively you can request a callback by completing the form below and we'll get back to you as soon as possible.













