Tridonic 87500203 LCI 60W 1050mA TEC SR – Limited Stock

87500203 Common Data

Rated supply voltage 220 – 240 V
Input voltage AC 198 – 264 V
Rated current (at 230 V, 50 Hz) 0.29 A
Mains frequency 50 / 60 Hz
Overvoltage protection 300 V AC, 1 h
Max. input power 70 W

Output power 60 W
THD (at 230 V, 50 Hz, full load) < 20 %
Output current tolerance ± 7.5 %
Typical ripple current at full load ± 25 %
Turn on time (at 230 V, 50 Hz, full load) ≤ 0.7 s
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.7 s
Hold on time at power failure 0 s

Ambient temperature ta -20 … +50 °C
Ambient temperature ta (at life-time 50,000 h) 40 °C
Storage temperature ts -40 … +80 °C
Dimensions L x W x H 159.4 x 82 x 34 mm

87500203 Wiring

Installation instructions

The LED module and all contact points within the wiring must be sufficiently insulated against 5.0 kV surge voltage.
Air and creepage distance must be maintained.

Replace LED module

1. Mains off
2. Remove LED module
3. Wait for 60 seconds
4. Connect LED module again

Hot plug-in or secondary switching of LEDs is not permitted and may cause a very high current to the LEDs.

87500203 Wiring type and cross section

The wiring can be in stranded wires with ferrules or solid. For perfect function of the cage clamp terminals the strip length should be 4 – 5 mm for the input terminal.
The max. torque at the clamping screw (M3) is 0.2 Nm

87500203 Wiring instructions

• All connections must be kept as short as possible to ensure good EMI behaviour
• Mains leads should be kept apart from LED Driver and other leads (ideally 5 – 10 cm distance)
• The maximum length of output wires is 2 m.

• Secondary switching is not permitted.
• Incorrect wiring can damage LED modules.
• Through wiring of mains is connecting additional LED Driver only. Max. permanent current of 12 A may not be exceeded.
• The wiring must be protected against short circuits to earth (sharp edged metals parts, metal cable clips, louver, etc.)

Fixing conditions

Dry, acidfree, oilfree, fatfree. It is not allowed to exceed the maximum ambient temperature (ta) stated on the device. Minimum distances stated below are recommendations and depend on the actual luminaire.

Is not suitable for fixing in corner

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.