Tridonic 87501146 LC 15/100-400/42 DA SR SNC4

87501146 Common Data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Typ. rated current (at 230 V, 50 Hz, full load) 12 85 mA
Typ. current (220 V, 0 Hz, full load, EOFx dimlevel) 2 15 mA
Max. input power 18.5 W

Output power range (P_rated) 0.9 – 15 W
Typ. efficiency (at 230 V, 50 Hz, full load) 2 83.5 %
λ over full operating range (max.) 1 0.95
λ over full operating range (min.) 0.55C
Typ. power consumption on stand-by 3 < 0.45 W
In-rush current (peak / duration) 7.5 A / 220 µs
THD (at 230 V, 50 Hz, full load) 1 < 22 %
Starting time (AC mode) < 700 ms

Starting time (DC mode) < 900 ms
Switchover time (AC/DC) 4 < 300 ms
Turn off time (at 230 V, 50 Hz, full load) < 50 ms
Output current tolerance 15 ± 5 %
Max. output current peak (non-repetitive) ≤ output current + 20 %
Output LF current ripple (< 120 Hz) ± 5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4

Max. output voltage (U-OUT) 59 V
Dimming range 1 – 100 % (min. 5 mA)
Mains surge capability (between L – N) 6 1 kV
Mains surge capability (between L/N – PE) 2 kV

Burst / surge peaks output side against PE < 3 kV
Type of protection IP20
Lifetime up to 100,000 h
Guarantee (conditions at www.tridonic.com) 5 Year(s)
Dimensions L x W x H 144 x 30 x 21 mm

Possible alternative for the Tridonic 28000655 LCA 50W 100–400mA one4all lp, please contact sales to confirm. suitability to the application.

87501146 Wiring

87501146 Wiring type and cross section

For wiring use stranded wire with ferrules or solid wire from 0.75–1.5 mm² (mains wires) and 0.5–1.5 mm² (secondary wires, LED module).

Strip 9–10 mm (mains wires) and 8.5–9.5 mm (secondary wires, LED module) of insulation from the cables to ensure perfect operation of the push-wire
terminals.

87501146 Wiring guidelines

• The cables should be run separately from the mains connections and mains cables to ensure good EMC conditions.
• The LED wiring should be kept as short as possible to ensure good EMC.

The max. secondary cable length is 2 m (4 m circuit), this applies for LED output.

• To comply with the EMC regulations run the secondary wires (LED module) in parallel.
• Secondary switching is not permitted.
• The LED driver has no inverse-polarity protection on the secondary side.

Wrong polarity can damage LED modules with no inverse-polarity protection.

• Wrong wiring of the LED driver can lead to malfunction or irreparable damage.
• To avoid damage of the Driver, the wiring must be protected against short circuits to earth (sharp edged metal parts, metal cable clips, louver,
etc.).

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.