Tridonic 89800112 EM powerLED NM BASIC 1 W

89800112 Common Data

Rated supply voltage 220 – 240 V
Mains frequency 50 / 60 Hz
Forward voltage range LED module 2.8 – 3.4 V
Mains current 15 mA
Mains power in charging operation 1.3 W
LED current in emergency operation 320 mA
Starting time 0.43 s from detection of emergency event
Overvoltage protection 320 V (for 1 h)
Battery charging time 24 h
Charge current 120 mA
Battery discharge current Refer to data sheet
Number of cells 3
Max. casing temperature tc 70 °C
Ambient temperature ta 0 … +60 °C
Mains voltage changeover threshold According to EN 60598-2-22
Type of protection IP20
Lifetime up to 50,000 h

The 89800122 can be provided as a kit with the appropriate NiMH battery if required, see our YUASA 3SCM3-0L4 3.6V 3AH NiMH STICK BATTERY for suitability.

89800112 Wiring type and cross section

The wiring can be in stranded wire or solid. Strip 8.5–9.5 mm of insulation from the cables to ensure perfect operation of the push-wire terminals.

89800112 Wiring instructions

• The EM powerLED terminals, battery, indicator LED and test switch terminals are classified as SELV. Keep the wiring of the input terminals separated from the wiring of the SELV terminals or consider special wiring (double insulation, 6 mm creepage and clearance) when these connections should be kept SELV.
• EM powerLED leads should be separated from the mains connections and wiring for good EMC performance.
• Maximum lead length on the EM powerLED terminals is 3 m. For a good EMC performance keep the LED wiring as short as possible.
• The secondary wires (LED module) should be routed in parallel to ensure good EMC performance.
• Maximum lead length for the test switch and Indicator LED connection is 1 m. The test switch and Indicator LED wiring should be separated from the EM powerLED leads to prevent noise coupling.
• Battery leads are specified with 0.5 mm2 cross section and a length of < 1 m.
• To avoid the damage of the control gear, the wiring must be protected against short circuits to earth (sharp edged metal parts, metal cable clips, louver, etc.).

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.