Philips 929001649706 Xitanium 36W WH 0.3-1A 54V TD/Is CL 230V

929001649706 Electrical Data

929001649706  Electrical input data

Rated input voltage range 220…240 Vac Performance range
Rated input voltage 230 Vac
Rated input frequency range 50…60 Hz Performance range
Rated input current 0.19 A @ rated output power @ rated input voltage
Rated input power 44 W @ rated output power @ rated input voltage
Power factor 0.9 @ rated output power @ rated input voltage
Total harmonic distortion 20 % @ rated output power @ rated input voltage

Efficiency 85 % @ rated output power @ rated input voltage @ max. Iout
Rated input voltage DC range 186…250 Vdc Performance range
Input voltage AC range 198…264 Vac Operational range
Input frequency AC range 45…66 Hz Operational range
Input voltage DC range 168…275 Vdc Operational range
Standby Power 0.31 W
Isolation input to output SELV

929001649706 Electrical output data

Regulation method Constant Current
Output voltage 5…54 Vdc
Output voltage max. 60 V Maximum output voltage (rms)
Output current 300…1050 mA
Output current min programmable 300 mA
Min output current 7 mA
Output current tolerance ± 5 % @full load
Output current ripple LF ≤ 4 % Ripple = peak / average, < 3kHz

Output Pst LM ≤ 0.3
Output SVM ≤ 0.3
Output power 0.0…36.0 W
Minimum performance output power 9 W Power factor > 0.9 and THD < 20%

929001649706 Control interfaces

Control method DALI, Touch & Dim (TD) 
Dimming range 1…100 % Default range
Isolation controls input to output Reinforced acc. IEC61347-1
Supported DALI parts 207, 251, 252, 253

929001649706 Wiring and Connections

Input wire cross-section 0.5…1.5 / 20…16 mm2 / AWG solid / stranded wire
Input wire strip length 8…9 mm
Output wire cross-section 0.5…1.5 / 20…16 mm2/ AWG solid / stranded wire
Output wire strip length 8…9 mm
Control wire cross-section 0.5…1.5 / 20…16 mm2/ AWG solid / stranded wire
Control wire strip length 8…9 mm
Maximum cable length 0.6 m Total length of wiring including LED module, one way

Isolation

Input – SELV Basic
Output SELV – Reinforced
DALI Basic Reinforced –

Dimensions and weight

Length (A1) 97.5 mm
Mounting hole distance (A2) 88 mm
Width (B1) 42.2 mm
Height (C1) 21.2 mm
Mounting hole diameter (D1) 4.1 mm
Weight 100 gram

Operational temperatures and humidity

Ambient temperature -20…+50 ºC Higher ambient temperature allowed as long as Tcase-max is not exceeded
Tcase-max 80 ºC Maximum temperature measured at Tcase-point
Tcase-life 80 ºC Measured at Tcase-point
Maximum housing temperature 110 ºC In case of a failure, inherent by design
Relative humidity 10…90 % Non-condensing

Lifetime

Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10%

Temperature

80 50000 hr Temperature measured @Tc point
75 >50000 hr
70 >50000 hr

Storage temperature and humidity

Ambient temperature -25…+85 ºC
Relative humidity 5…95 % Non-condensing

Programmable features

Set Adjustable Output Current (AOC) Programmable, SimpleSet 700 mA
Adjustable Light Output (ALO) Yes OFF
Constant Light Output (CLO) Yes OFF
Touch & Dim (TD) Yes ON
Corridor Mode Yes ON Default: T1=55s, T2=12s, T3=30min
DC emergency (DCemDim) No Light output is 100%
OEM Write Protection (OWP) Yes OFF
Luminaire Info (DALI part 251) Yes —
Luminaire maintenance (DALI part 253) Yes —

Non-programmable features

Open load protection Yes Automatic recovering
Short circuit protection Yes Automatic recovering
Over power protection Yes Automatic recovering
Hot wiring No
Suitable for fixtures with protection class I and II per IEC60598
Energy metering (DALI part 252) Yes
Diagnostics (DALI part 253) Yes

Inrush current

Inrush current 9 A Input voltage 230V
Inrush peak width 22 µs Input voltage 230 V, measured at 50% height
Drivers / MCB 16A type B ≤ 34 pcs Input voltage 230V230

Driver touch current / protective conductor current / earth leakage current

Typical Touch Current (ins. Class II) 0.7 mA peak Acc. IEC61347-1. LED module contribution not included

Surge immunity

Mains surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Control surge immunity (diff. mode) 1 kV Acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 2 kV Acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us

Application Info (Approbation)

Approval marks and Certifications BIS / CCC / CE / DALI 2 / EAC / EL / ENEC / RCM / SELV / UKCA
Ingress Protection classification (IP) 20
Application Indoor Point
Mounting Type Built-in

DALI Constant Current LED Drivers are advanced, addressable power supplies for LED lighting, enabling precise, flicker-free dimming (down to 0.1%–1%) and bi-directional communication with intelligent control systems. Supporting DALI-1/DALI-2 protocols, they are ideal for commercial/architectural, allowing individual or group control. Key features include DIP switch/NFC adjustable current, wide wattage ranges (20W–300W), and high efficiency.

Key Aspects of DALI Constant Current LED Drivers:

Functionality & Control: These drivers work within the Digital Addressable Lighting Interface (DALI) system, which allows individual addressing for lights on the same circuit, providing granular control over dimming and scene management.

Performance Metrics: They provide stable, constant current output (e.g., 250mA, 350mA, 500mA, 700mA) suitable for LED arrays. They boast high power factors (e.g., 0.95–0.98), reducing energy consumption.

Dimming & Compatibility: DALI-2 drivers offer smooth, flicker-free dimming, often supporting push dimming or DALI commands. Many are compatible with DALI-1 and the modern DALI-2 (IEC 62386) standards, including DT6 for dimming.

Configuration & Installation: Many models feature dip switches to select specific mA outputs, allowing for flexibility during installation. Some advanced drivers (e.g., 12W DALI DT8 NFC Enabled LED Driver) utilize NFC technology for easy configuration of current, addresses, and dimming curves via mobile apps.

Protection & Safety: These drivers are generally Class II/Class 2, providing safety protections such as short circuit, overload, and overvoltage protection with automatic recovery.

Versatility: With a wide operating voltage range (e.g., 100-277V AC) and broad output voltage range (e.g., 3-50V DC), they are suited for diverse applications, including LED strip tapes and fixtures

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.