Philips 929003876480 Xi LED Transformer 150W 24VDC – Limited Stock

929003876480 Electrical input data

Rated input voltage range 220…240 Vac Performance range
Rated input voltage 230 Vac
Rated input frequency 47…63 Hz Performance range
Rated input current 0.7 A @ rated output power @ rated input voltage
Rated input power 163.0 W @ rated output power @ rated input voltage

Power factor performance range ≥ 0.95 @ rated output power @ rated input voltage
Total harmonic distortion 10 % @ rated output power @ rated input voltage
Efficiency 92.0 % @ rated output power @ rated input voltage
Input voltage AC 198…264 Vac Operational range
Input frequency AC 45…66 Hz Operational range
Isolation input to output SELV

929003876480 Electrical output data

Regulation method Constant Voltage
Output voltage 24 Vdc Output voltage range: 22.8 … 25.2VDC @ output current range 2.5 … 6.25A
Output voltage max. 31 V
Output current 310…6250 mA
Output voltage ripple ≤ 2 % ≤ 480 mVpp

Output power 7.5…150.0 W
Line regulation ≤ 1 %
Load regulation ≤ 3 %
Turn-on delay ≤ 1 s
Output voltage rise time ≤ 50 ms
Hold-up time ≥ 10 ms

Control interfaces

Control method Fixed

Wiring and Connections

Input wire cross-section 0.75…1.5 / 18…16 mm2 / AWG solid / stranded wire
Input wire strip length 7.5…8.5 mm
Output wire cross-section 0.5…1.5 / 20…16 mm2 / AWG solid / stranded wire
Output wire strip length 7.5…8.5 mm
Maximum cable length 2.5 m Total cable length between driver and LED modules per CISPR15

Isolation

Mains – SELV
Output SELV –

929003876480 Dimensions and weight

Length (A1) 253.2 mm ± 1
Mounting hole distance (A2) 244.2 mm ± 1
Width (B1) 42.5 mm ± 0.5
Width (B2) 31 mm ± 0.5
Height (C1) 31 mm ± 0.5
Mounting hole diameter (D1) 4 mm ± 0.5
Weight 450 gram

Operational temperatures and humidity

Ambient temperature -20…+50 ºC Higher ambient temperature allowed as long as Tcase-max is not exceeded
Tcase-max 90 ºC Maximum temperature measured at Tcase-point
Tcase-life 80 ºC Measured at Tcase-point
Relative humidity 10…90 % Non-condensing

929003876480 Lifetime

Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10%

Storage temperature and humidity

Ambient temperature -20…+85 ºC
Relative humidity 5…95 % Non-condensing

Non-programmable features

Open load protection Yes Automatic recovering
Short circuit protection Yes Hiccup mode, automatic recovering
Over power protection Yes Automatic recovering
Hot wiring Yes No load power < 0.5W
Suitable for fixtures with protection class II per IEC60598

Inrush current

Inrush current 72.4 A Input voltage 230V
Inrush peak width 246 µs Input voltage 230 V, measured at 50% height
Drivers / MCB 16A type B ≤ 6 pcs Input voltage 230V230

Driver touch current / protective conductor current / earth leakage current

Typical Touch Current (ins. Class II) 0.7 mA peak Acc. IEC60598-1. LED module contribution not included

Surge immunity

Mains surge immunity (diff. mode) 1 kV L-N acc. IEC61000-4-5. 2 Ohm
Mains surge immunity (comm. mode) 2 kV L/N-PE, acc. IEC61000-4-5. 12 Ohm

Application Info (Approbation)

Approval marks and Certifications CCC / CE / ENEC / MM / RCM / SELV / UKCA
Ingress Protection classification (IP) 20
Noise and hum dB(A) 20
Application Indoor Constant Voltage
Mounting Type Built-in / Independent

A non-dimmable constant voltage LED driver takes standard mains AC power and converts it into a fixed, steady DC output voltage (typically 12V or 24V). It is designed purely to provide constant on/off power without brightness adjustment capabilities.

Key Characteristics

Fixed Output: Delivers a constant voltage (e.g., 12 V or 24 V) regardless of the electrical load connected, as long as the driver’s maximum wattage isn’t exceeded.

No Brightness Control: Cannot be connected to a standard wall dimmer. The light stays at 100% brightness.

Built-in Safety: Quality drivers include built-in protections against overcurrent, short circuits, and thermal overloads.

Best Use CasesLED Strip Lights: Ideal for standard 12V or 24V LED tape.

RGB/Colour-Changing Setups: Used for RGB, RGBW, or tunable white strips because the dimming and colour mixing are handled by a dedicated controller placed between the driver and the LEDs.

Cabinet and Accent Lighting: Perfect for fixed-illumination tasks under shelves, in alcoves, or for signage.

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.