Vossloh Schwabe EDXe 106/12.037 186412 – 6W 12V IP20 Protected Constant Voltage LED Driver

EDXe 106/12.037 Technical Data

Max Output Power: 6W
Type: EDXe 106/12.037
Ref. No: 186412
Voltage 50–60 HzV: 220–240
Mains current mA: 70–60
Inrush current A / µs: 16 / 80
Current output DC mA (± 5%): 0–500
Voltage output V (± 5%): 12
THD at full load % (230 V): > 75
Ripple 100 Hz %: ≤ 3

Safety functions

• Transient mains peaks protection:

Values are in compliance with EN 61547 (interference immunity).
Surges between L–N: up to 1 kV

• Short-circuit protection:

The control gear is protected against permanent short-circuit with automatic restart function.

• Overload protection:

The control gear only works in range of rated output power and voltage problemfree. Please check that the selected LED load is suitable (see Electrical Characteristics on this data sheet).

• No load operation:

The control gear is protected against no load operation (open load).

• If any of the above mentioned safety functions will be triggered, disconnect the control gear from the power supply then find and eliminate the cause of the problem.

An IP67 non-dimmable constant voltage LED driver is a fully weatherproof, dust-tight power supply that converts standard mains AC voltage into a steady, fixed DC voltage (usually 12V or 24V) to safely power LED lights, without providing any brightness adjustment controls.These power supplies are critical for reliable, permanent lighting installations.

Key Specifications & Features

IP67 Rating: Denotes a completely dust-tight seal and the ability to withstand temporary water immersion. This makes these drivers highly suitable for outdoor use, wet rooms, garden lighting, and architectural facades.

Constant Voltage (CV): Supplies a fixed output voltage (such as 12V or 24V) regardless of the electrical load. They are the standard for parallel-wired systems like LED strip lights.

Non-Dimmable: Operates strictly on an “on/off” basis. Because it lacks dimming circuitry, it is often more robust, simpler, and less expensive than dimmable equivalents.

Built-In Protections: Typically include short-circuit, overload, and over-temperature protections to ensure longevity and safety.

Common Applications

Exterior Signage & Displays: Perfect for illuminating storefront signs and landscape features where the driver must sit exposed to the elements.

LED Strip Lighting: Ideal for long runs of LED strips in bathrooms, kitchens, or under garden decking.

Whenever an electric light goes on around the world, Vossloh-Schwabe is likely to have made a key contribution to ensuring that everything works at the flick of a switch.

Vossloh-Schwabe has been around for more than 100 years. Headquartered in Germany, and with more than 500 employees at several production and sales sites throughout the world, Vossloh-Schwabe counts as a technology leader within the lighting sector. Top-quality, high-performance products form the basis of the company’s success.

Vossloh-Schwabe’s extensive product portfolio covers all lighting components: LED systems with matching control gear units, highly efficient optical systems, state-of-the-art control systems (Blu2Light and LiCS) as well as electronic and magnetic ballasts, ignitors and lampholders.

Vossloh-Schwabe operates based on a global, uniformly applicable quality management system. All production sites as well as the most important and largest distribution sites are also certified in accordance with ISO 9001.

The environmental management certification process in accordance with ISO 14001 was introduced in 2004 and the certification of all production sites took place at the end of 2005.

All quality relevant processes are subject to permanent monitoring and are managed using defined figures. All products are checked for compliance with the high Vossloh-Schwabe quality requirements along then entire production chain. Employees receive constant internal and external training to ensure that this standard is maintained.