VOSSLOH SCHWABE EDXE1200/24.067 186634

EDXe1200/24.067 Technical Data

Max output W 200
Type EDXE 1200/24.067
Ref. No. 186634
Voltage 50–60 Hz V 220–240
Mains current mA 1000–900
Inrush current A / µs 107 / 209
Current output DC mA 0–8300
Voltage output DC (V) (± 5%) 24
THD at full load % (230 V) 10
Efficiency at full load % (230 V) 94
Ripple 100 Hz % ≤ 3

EDXe 1200/24.067 Other Information

Assembly and Safety Information

Installation must be carried out under observation of the relevant regulations and standards. Installation must be carried out in a voltage-free state (i.e. disconnection from the mains). The following advices must be observed; non-observance can result in the destruction of the LED drivers, fire and/or other hazards.

Mandatory regulations
• DIN VDE 0100
• EN 60598-1

Mechanical mounting

Mounting position: Drivers 186634, 187040 and 187041 are suitable for independent operation.

Drivers 186433 and 186434 are not suitable for independent operation.

• Mounting location: LED drivers 186433, 186434 are designed for integration into luminaires or comparable devices.

Independent LED drivers do not need to be integrated into a casing.

Installation in outdoor luminaires: degree of protection for luminaire with water protection rate ≥ 4 (e.g. IP54 required).

• Degree of protection: IP67
• Clearance: Min. 0.10 m from walls, ceilings and insulation
• Surface: Solid and plane surface for optimum heat dissipation required.
• Heat transfer: If the driver is destined for installation in a luminaire. sufficient heat transfer must be ensured between the driver and the luminaire casing.

LED drivers should be mounted with the greatest possible clearance to heat sources. During operation. the temperature measure at the driver’s tc point must not exceed the
specified maximum value.

• Fastening: Using M4 screws in the designated holes
• Tightening torque: 0.2 Nm

Whenever an electric light goes on around the world, Vossloh-Schwabe is likely to have made a key contribution to ensuring that everything works at the flick of a switch.

Vossloh-Schwabe has been around for more than 100 years. Headquartered in Germany, and with more than 500 employees at several production and sales sites throughout the world, Vossloh-Schwabe counts as a technology leader within the lighting sector. Top-quality, high-performance products form the basis of the company’s success.

Vossloh-Schwabe’s extensive product portfolio covers all lighting components: LED systems with matching control gear units, highly efficient optical systems, state-of-the-art control systems (Blu2Light and LiCS) as well as electronic and magnetic ballasts, ignitors and lampholders.

Vossloh-Schwabe operates based on a global, uniformly applicable quality management system. All production sites as well as the most important and largest distribution sites are also certified in accordance with ISO 9001.

The environmental management certification process in accordance with ISO 14001 was introduced in 2004 and the certification of all production sites took place at the end of 2005.

All quality relevant processes are subject to permanent monitoring and are managed using defined figures. All products are checked for compliance with the high Vossloh-Schwabe quality requirements along then entire production chain. Employees receive constant internal and external training to ensure that this standard is maintained.