Mean Well ELG-200-12A-3Y – 200W Constant Voltage + Constant Current IP65 Protected LED Driver

ELG-200-12A-3Y Technical Information

ELG-200-A-12A-3Y Output

DC Voltage 12V
Constant Current Region 6 ~ 12V
Rated Current 16A
Rated Power 200VAC ~ 305VAC 192W / 100VAC ~ 180VAC 144W
Ripple & Noise (max.) 150mVp-p
Voltage ADJ. Range Adjustable for A/AB-Type only (via the built-in potentiometer) 11.2 ~ 12.8V
Current Adj. Range Adjustable for A/AB-Type only (via built-in potentiometer) 8 ~ 16A
Voltage Tolerance ±3.0%
Line Regulation ±0.5%
Load Regulation ±2.0%
Setup, Rise Time 500ms, 100ms/230VAC, 1000ms, 100ms/115VAC
Hold Up Time (Typ.)15ms/115VAC 10ms/230VAC

 ELG-200-12A-3Y Input

Voltage Range 100 ~ 305VAC 142 ~ 431VDC (Please refer to “STATIC CHARACTERISTIC” section)
Frequency Range 47 ~ 63Hz
Power Factor PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
Total Harmonic Distortion THD< 20%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

Efficiency (Typ.) 90%
AC Current 1.8A / 115VAC 1.2A / 230VAC 1.0A/277VAC
Inrush Current (Typ.) COLD START 60A(twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 
Max. No of PSUs on 16A Circuit Breaker 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
Leakage Current <0.75mA / 277VAC
No Load / Standby Power Consumption No load power consumption <0.5W for Blank / A / Dx / D2-Type Standby power consumption <0.5W for B / AB / DA-Type

ELG-200-12A-3Y Protection

Over Current 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
Short Circuit Hiccup mode, recovers automatically after fault condition is removed 13.5 ~ 18V
Over Temperature Shut down output voltage, re-power on to recover

Environment

Working Temp. Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
Max. Case Temp. Tcase=+90℃
Working Humidity 20 ~ 95% RH non-condensing
Storage Temp., Humidity -40 ~ +80℃, 10 ~ 95% RH
Temp. Coefficient ±0.03%/℃ (0 ~ 50℃)
Vibration 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

Safety & EMC

Safety Standards UL8750(type”HL”), CSA C22.2 No. 250.13-12; IEC/EN/AS/NZS 61347-1, IEC/EN/AS/NZS 61347-2-13 independent, EN62384; EAC TP TC 004;BIS IS15885(for 24/24B/36/36A/42/42A/48/48B/54/54A only);GB19510.1, GB19510.14; IP65 or IP67;KC61347-1,KC61347-2-13 approved
DALI Standards Compliance to IEC62386-101,102,(207 by request) for DA Type only
Withstand Voltage I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC Emission Compliance to EN55015,EN61000-3-2 Class C (@load≧60%); EN61000-3-3;GB17743, GB17625.1;EAC TP TC 020; KC KN15,KN61547
EMC Immunity Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV);EAC TP TC 020; KC KN15,KN61547

Others

MTBF 2391.4K hrs min. Telcordia SR-332 (Bellcore) ;204.9K hrs min. MIL-HDBK-217F (25℃)
Dimension 244*71*37.5mm (L*W*H)
Packing 1.22Kg; 12pcs / 15.2Kg / 0.72CUFT
Part Number ELG-200-12A-3Y

LED drivers for street lights act as the vital power supply and control unit. They convert fluctuating, high-voltage mains AC to stable, regulated DC, while supplying a constant current to the LEDs. High-performance drivers ensure uniform brightness, protect against harsh weather, and enable smart city dimming.

Core Functions & Features

Constant Current Control: LEDs are current-driven devices; a constant current driver ensures the light output remains steady and predictable despite temperature changes or grid fluctuations.

Surge and Weather Protection: Because street lights operate outdoors, drivers are engineered with heavy-duty surge protection (often 10kV to 20kV) to withstand lightning strikes, and are sealed to high waterproof ratings (IP65 to IP67).

Smart Dimming Capabilities: Modern street light drivers support protocols like DALI or 1-10V dimming. This allows municipalities to dim street lights during low-traffic hours to save energy.

Thermal Management: Drivers are equipped with over-temperature protection, dialing back the current to cool down the fixture if the internal temperature gets too high.

Established in 1982, headquartered in New Taipei City, MEAN WELL is a Standard Power Supply manufacturer and dedicated to developing specialized industrial power supplies solutions for decades.

Marketed worldwide with its own brand “MEAN WELL”, MEAN WELL power supply has been widely used in all industries and almost everywhere in your life. From home espresso machine, Gogoro electric scooter charging station, to the well-known landmark Taipei 101 skyscraper top lighting and Taoyuan International Airport jet bridge lighting, all of these you will surprisingly find MEWN WELL Power hidden inside, functioning as the heart of the machine, providing stable voltage and current for a long time, and powering up the whole machine and system to operate smoothly.

MEAN WELL Power has been widely used in different industries such as Industrial Automation, LED Lighting/ outdoor signage, Medical, Telecommuting, Transportation and Green Energy applications.

MEAN WELL has maintained a long term, solid relationship with our customers, suppliers, and employees in the spirit of “good intention” and “reliable partner” commitments since the company founded. Over the years, MEAN WELL has built hundreds of reliable partnership around the world.