Euchips EUP150T-1H24V-0 – 150W 24V TRIAC Dimmable Constant Voltage IP20 Protected LED Driver

EUP150T-1H24V-0 Common Data

EUP150T-1H24V-0 Output

Channels 1
Voltage 24VDC
Current 6.25A
Power 150W
Voltage Accuracy ±3%
R & N (Max) 400mVp-p

Input

Voltage 220VAC – 240VAC
Frequency 50/60Hz
Dimming Voltage Range 40-240VAC
Efficiency (Typ) >90%@230VAC,full load
PF ＞0.95@230VAC,full load
THD ＜10%@230VAC,full load
Current 0.8A@230VAC
Inrush current Cold start,27A(twidth=650us measured at 50% Ipeak) @230VAC

Protection

Short circuit Close the output, restart to recover since fault condition is removed for 10s
Over voltage Hiccup, recovers after fault condition is removed
Over current Hiccup, recovers after fault conditions removed
Over temperature Shut down and auto-restart after normal temperature

Function

Dimming mode Triac/ELV

Others

Dimension 310*60*45mm（L*W*H）
Packing size 315*66*50mm,10pcs/carton
G.W 860g
Working temp. -20℃ ~ 50℃
Relative humidity 20~90% RH

EUP150T-1H24V-0 Dimensions

Top view

Side view

Cautions

1. The product shall be installed and serviced by a qualified person.

2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is mounted in a water proof enclosure.

3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.

4. Please check if the output voltage and current of any LED power supplies used comply with the requirement of the product.

5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector.

6. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.

7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.

Constant voltage TRIAC LED drivers convert standard mains AC voltage into a stable low-voltage DC output (usually 12V or 24V). They are specially designed to pair with traditional wall-mounted TRIAC dimmer switches, allowing you to dim LED strip lights and tape without needing extra low-voltage control wires.

How They Work

Constant Voltage: They maintain a steady output voltage regardless of the electrical load. As you add more LEDs, the driver supplies more current to maintain that voltage.

TRIAC Dimming: TRIAC (Triode for Alternating Current) dimmers work by “chopping” the AC mains waveform. These drivers interpret this chopped waveform and translate it into a dimmed DC output, providing smooth, flicker-free brightness control from 0% to 100%.

Key Specifications to Consider

Voltage Rating: Must match your LEDs. This is almost exclusively 12V DC or 24V DC for LED tape and strip lights.

Wattage and Headroom: Your driver’s total wattage must exceed your lighting load. Always calculate the total wattage of your LED strips, and add a 10% to 20% safety margin/headroom for the driver. Overloading causes failure, while severe underloading can cause flickering.

Dimmer Compatibility: TRIAC dimmers can be either Leading Edge (forward phase) or Trailing Edge (reverse phase). Make sure your driver is rated to work with your specific dimmer type. Many modern LED drivers support both.

IP Rating: If you are installing the driver in a bathroom or outdoors, you need a weatherproof or waterproof unit (usually IP65 or IP66). Indoor, dry installations typically use IP20 units.

Founded in 2005, Euchips is a leading global manufacturer specializing in LED controllers, dimmable drivers, and advanced lighting control systems. Operating under the slogan “Universal Compatibility, Flicker-free,” they serve clients worldwide in hotels, casinos, commercial buildings, and luxury residences.

Core Products & Technology

Euchips develops a broad portfolio of architectural and commercial lighting solutions:

Lighting Protocols: DALI, 0-10V, Triac, and DMX512 controllers and dimmers.

Drivers & Interfaces: Smart wireless drivers, LED dimmable drivers, and control systems.

Compatibility: Their products are designed to integrate with major global systems, including Lutron, Philips, ABB, and Schneider.

Company Profile & Milestones

Patents & Certifications: They hold over 90 patents and have secured international safety and quality certifications such as CE-LVD, ENEC, and SAA.

Global Reach: Their products are exported to more than 90 countries and regions.

Manufacturing: Alongside their longstanding operations, they officially opened a 4,000-square-meter factory in Vietnam to increase production capacity and better meet customized lighting needs.