Hytronik HEC7030 (SAM5) – Integrated LED Driver, With Super Compact Sensor Antenna

HEC7030 (SAM5) Technical Data

Operating voltage 220~240VAC, 277VAC
Input current 0.25 – 0.22A
Input power 35W (Max.)
Warm time 20s
Detection area Sensor OFF/50% /75% /100% (100% /50% /10% available on RC)
Hold time 5s /30s /3min /10min (30s /1min /5min /10min /30min available on RC)
Daylight threshold 5lux/20Lux/50Lux/disable (2Lux /10Lux / 50Lux /Lux disable available on RC)
Standby period 0s/10s/30min/+∞ ( 0s /10s / 1min / 10min/ 30min /+∞ available on RC)
Standby dimming level 10%/30% (10%/ 30%/ 50% available on RC)

Microwave frequency 5.8GHz+/-75MHz
Microwave power <0.2mW
Detection range Max. (oxH): 12m x 6m
Detection angle 30o~150o
Mounting height Max.6m
Output LED current 350mA/500mA/550mA/700mA/750mA/900mA
Output LED voltage 10~60V (350mA) 10~60V (500mA) 10~55V (550mA) 10~43V (700mA) 10~40V (750mA) 10~25V (900mA)
Output LED power 3.5~21W (350mA) 5~30W (500mA) 5.5~30W (550mA) 7~30W (700mA) 7~30W (750mA) 9~23W (900mA)

Empty load voltage 68V
Power factor >0.9
Efficiency 85% (Max.)
Operating temperature -20oC ~ +50oC TC:75oC
Abnormal protection Output short-circuit protection with auto-reset
EMC standard EN55015 EN61547
Safety standard EN61347-1 EN61347-2-13 UL60950-1
Certification Semko, EMC, CE, ETL, SAA
Dielectric strength Input-output:3750VAC /5mA/1min
IP rating IP20

Integrated sensor-dim LED drivers are 2-in-1 units that combine a constant-current LED power supply with an occupancy or daylight sensor (like microwave or PIR). They save energy and installation space by automatically dimming lights when no motion is detected.

Key Features

Automated Dimming: Lights dim to a low-level (or turn off) when a room is vacant.

Daylight Harvesting: Built-in sensors measure ambient light and adjust brightness to maintain consistent room illumination.

Space-saving & Simple: By housing both components in a single enclosure, wiring and installation footprint are drastically reduced.

Common Configurations

Corridor Function (3-Step Dimming): When motion is detected, the light is at 100%. After a set period of vacancy, it dims to a standby level (e.g., 10% or 20%), and then turns off completely after a further delay.

Microwave vs. PIR: Microwave sensors detect movement through glass and thin walls, making them ideal for enclosed spaces or stairwells. PIR (Passive Infrared) sensors detect body heat, requiring a direct line of sight.

Adjustable Settings: Most units feature DIP switches or remote controls to adjust the detection area, hold time, and daylight threshold.

Hytronik is a company that specializes in energy-efficient and intelligent lighting control products, such as sensors, drivers, and controllers, that use technologies like Bluetooth Mesh and DALI. The company focuses on smart lighting solutions for both residential and commercial applications, offering products for various needs like motion detection, daylight harvesting, and dimming. Hytronik’s products are designed to save energy and provide a flexible, scalable, and interoperable lighting control system for users and lighting manufacturers.