Helvar LC40MINI-CC-700-1050 – Huge UK Based Stock

LC40MINI-CC-700-1050 Technical Data

LC40MINI-CC-700-1050 Mains Characteristics

Nominal rated voltage range 220 V – 240 V, 50 – 60 Hz
AC voltage range 198 VAC – 264 VAC
DC voltage range 198 VDC – 280 VDC
Mains current at full load 0.32 A
Frequency 50 Hz – 60 Hz
Stand-by power consumption < 0.5 W
THD at full power < 10 %
Tested surge protection 1 kV kV L-N (IEC 61000-4-5)
2 kV kV L/N-GND (IEC 61000-4-5)
Tested fast transient protection 1 kV kV (IEC 61000-4-4)

Insulation between circuits & driver case

Mains circuit – SELV circuit Double/reinforced insulation
Mains and output – Driver case Double/reinforced insulation
Load Output (SELV <60 V)
Output current (Iout) 700 mA – 1050 mA (default)
Accuracy ± 5 %
Ripple < 2 %* at ≤ 120 Hz *) Low frequency
PstLM < 0.03 2)
SVM < 0.01 2) 2) At full power, measured with Cree XP-G LED modules.
Uout (max) (abnormal) 50 V

LC40MINI-CC-700-1050 Connections and Mechanical Data

Wire size 0.5 mm2 – 1.5 mm2
Wire type Solid core and fine-stranded
Wire insulation According to EN 60598
Maximum driver to LED wire length 1.5 m
Weight 166 g
IP rating IP20

LC40MINI-CC-700-1050 LED driver is suited for built-in usage in luminaires. With external strain relief (LC-SR-MINI, LC-SR-MINI-B or LC-SR-MINI-LOOP), independent use is possible too.

In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1). The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution.

The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Operating conditions of the LED drivers may never exceed the specifications as per the product datasheet.

Installation & operation

Maximum ambient and tc temperature:

• For built-in components inside luminaires, the ta ambient temperature range is a guideline given for the optimum operating environment. However, integrator must always
ensure proper thermal management (i.e. mounting base of the driver, air flow etc.) so that the tc point temperature does not exceed the tcmaximum limit in any circumstance.

• Reliable operation and lifetime is only guaranteed if the maximum tc point temperature is not exceeded under the conditions of use.

Current setting via DIP switch

LC40MINI-CC-700-1050 LED driver features a constant current output adjustable via DIP switch combinations

• For the combination/current values, refer to the table on page 3.
• Only the DIP switch settings presented in the table must be used.

Miniature Circuit Breakers (MCB)

• Type-C MCB’s with trip characteristics in according to EN 60898 are recommended.
• Please see more details in “MCB information” document in each driver product page in “downloads & links” section.

At Helvar Components we create intelligent and energy-saving lighting components. We are a strong independent company with sustainability values built into our core. Our commitment to the industry has made us a leading provider of LED lighting components.

Our origin is in Finland, where today we have not just our headquarters, but our unique competence centre in Karkkila. Located just outside of the Helsinki Capital area, this centre includes decades worth of lighting experience, product developments, manufacturing, and global distribution warehouse. Worldwide, we serve our customers locally with our international sales offices and global network of partners