Helvar LC60DS-CC-1050-1700 – Huge UK Based Stock

LC60DS-CC-1050-1700 Technical Data

LC60DS-CC-1050-1700 Mains Characteristics

Nominal rated voltage range 220 V – 240 V, 50 – 60 Hz
Rated emergency voltage range* 196 V – 254 V, 0 Hz
AC voltage range 198 VAC – 264 VAC
Withstands max. 320 VAC (max. 1 hour)
Withstands min. 176 VAC (max. 1 hour)
DC voltage range* 176 VDC – 280 VDC
Mains current at full load 0.28 – 0.31 A
Frequency 50 Hz – 60 Hz
Stand-by power consumption < 0.5 W
THD at full power < 5 %
Tested surge protection 1 kV L-N (IEC 61000-4-5)
2 kV L/N-GND (IEC 61000-4-5)
Tested fast transient protection 2 kV (IEC 61000-4-4)
*For emergency use, see details in page 4

Insulation between circuits & driver case

Mains circuit – SELV circuit Double/reinforced insulation
Mains and output – Driver case Double/reinforced insulation

Load Output (SELV <60 V)

Output current (Iout) 1050 mA – 1700 mA (default)
Accuracy ± 5 %
Ripple < ±3 %* at ≤ 120 Hz *) Low frequency
PstLM < 0.05*
SVM < 0.01* *) At full power, measured with Cree XP-G LED modules.
Uout (max) (abnormal) 60 V

LC60DS-CC-1050-1700 Connections and Mechanical Data

Wire size 0.5 mm2 – 1.5 mm2
Wire type Solid core and fine-stranded
Wire insulation According to EN 60598
Maximum driver to LED wire length 1.5 m
Weight 146.4 g
IP rating IP20

LC60DS-CC-1050-1700 LED driver is suited for built-in usage in luminaires. With LC-SRC strain relief, independent use is possible too. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1).

The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets. Operating conditions of the LED drivers may never exceed the specifications as per the product datasheet.

Installation & operation

Maximum ambient and tc temperature:
• For built-in components inside luminaires, the ta ambient temperature range is a guideline given for the optimum operating environment. However, integrator must always ensure proper thermal management (i.e. mounting base of the driver, air flow etc.) so that the tc point temperature does not exceed the tc maximum limit in any circumstance.

• Reliable operation and lifetime is only guaranteed if the maximum tc point temperature is not exceeded under the conditions of use.

At Helvar Components we create intelligent and energy-saving lighting components. We are a strong independent company with sustainability values built into our core. Our commitment to the industry has made us a leading provider of LED lighting components.

Our origin is in Finland, where today we have not just our headquarters, but our unique competence centre in Karkkila. Located just outside of the Helsinki Capital area, this centre includes decades worth of lighting experience, product developments, manufacturing, and global distribution warehouse. Worldwide, we serve our customers locally with our international sales offices and global network of partners