Helvar LL1X23-80 Active+

LL1x23-80 Active+ Technical Data

LL1x23-80 Active+ Mains Characteristics

Voltage range 198 VAC – 264 VAC
DC range 176 VDC – 280 VDC
Starting voltage > 190 VDC
Max mains current at full load 0.22 A – 0.42 A
Frequency 0 / 50 Hz – 60 Hz
Stand-by power 0.30 W

Load Output (non-isolated)

Output current (Iout) 150 mA (default) – 350 mA
Accuracy ± 5 %
Ripple < 2 %* at ≤ 120 Hz *) Low frequency, LED load: Cree MX3 LEDs
PstLM < 1*
SVM < 0.4* *) At full load
Uout (max) (abnormal) 400 V
EOFx (EL use) > 0.98

Operating Conditions and Characteristics

Max. temperature at tc point +75 °C
Ambient temperature range –20 °C … +50 °C
Storage temperature range –40 °C … +80 °C
Maximum relative humidity no condensation
Life time (90 % survival rate) 100 000 h, at tc = 65 °C
90 000 h, at tc = 70 °C
60 000 h, at tc = 75 °C

Connections and Mechanical Data

Wire size 0.5 mm2 – 1.5 mm2
Wire type solid core and fine-stranded 1/0.8MM
Maximum driver to LED wire length 5 m
Weight 220 g
IP rating IP20

LL1x23-80 Active+ LED driver is suited for in-built luminaire usage. In order to have safe and reliable LED driver operation, the LED luminaires will need to comply with the relevant standards and regulations (e.g. IEC/EN 60598-1).

The LED luminaire shall be designed to adequately protect the LED driver from dust, moisture and pollution. The luminaire manufacturer is responsible for the correct choice and installation of the LED drivers according to the application and product datasheets.

Specifications of the LED drivers may never exceed the operating conditions as per the product datasheets.

Wiring

Wire type and cross section

Refer to datasheets connections & mechanical data

Wiring insulation

According to recommendations in EN 60598

Maximum wire lengths

Refer to datasheets connections & mechanical data

Wire connections

Refer to datasheets connections diagram

Miniature Circuit Breakers (MCB)
Type-C MCB’s with trip characteristics in according to EN 60898 are recommended.

LED driver earthing

• LED drivers are designed to support different luminaire classifications, such as Class I or Class II fittings (no earth required). Check the individual LED driver type for its exact safety
class rating.

• For Helvar Components LED drivers to have a reliable operation and EMC performance, the luminaires are expected to have an earth connection.

At Helvar Components we create intelligent and energy-saving lighting components. We are a strong independent company with sustainability values built into our core. Our commitment to the industry has made us a leading provider of LED lighting components.

Our origin is in Finland, where today we have not just our headquarters, but our unique competence centre in Karkkila. Located just outside of the Helsinki Capital area, this centre includes decades worth of lighting experience, product developments, manufacturing, and global distribution warehouse. Worldwide, we serve our customers locally with our international sales offices and global network of partners