Mean Well LPF-60D-12 – 60W 3 in 1 Dimming Function CC LED Driver , With IP67 Level Protection

LPF-60D-12 Technical Data

LPF-60D-12 Output

DC Voltage 12V
Rated Current 5A
Rated Power 60W
Constant Current Region 7.2 ~12V
Current Ripple 5.0% max. @rated current
Current Tolerance +5.0%
Setup Rise Time 1000ms, 80ms / 115VAC 500ms, 80ms / 230VAC
Hold Up Time (Typ.)16ms/230VAC 16ms/115VAC

LPF-60D-12 Input

Voltage Range 90 ~ 305VAC 127 ~ 431VDC
Frequency Range 47 ~ 63Hz
Power Factor PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
(Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
Total Harmonic Distortion  THD< 20%(@load≧60%/115VC,230VAC; @load≧75%/277VAC)
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
Efficiency (Typ.) 86%
AC Current 0.8A / 115VAC 0.4A / 230VAC 0.32A/277VAC
Inrush Current (Typ.) COLD START 55A(twidth=270μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
Max. No. of PSUs on 16A Circuit Breaker 8 units (circuit breaker of type B) / 14 units (circuit breaker of type C) at 230VAC
Leakage Current <0.75mA / 240VAC

LPF-60D-12 Protection

Over Current 95 ~ 108% Constant current limiting, recovers automatically after fault condition is removed
Short Circuit Hiccup mode, recovers automatically after fault condition is removed
Over Voltage 15 ~ 17V Shut down and latch off o/p voltage, re-power on to recover
Over Temperature Shut down o/p voltage, re-power on to recover

Environment

Working Temp. Tcase=-40 ~ +80℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
Max. Case Temp. Tcase=+80℃
Working Humidity 20 ~ 95% RH non-condensing
Storage Temp., Humidity -40 ~ +80℃, 10 ~ 95% RH
Temp. Coefficient ±0.03%/℃ (0 ~ 50℃)
Vibration 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

Safety & EMC

Safety Standards UL8750, CSA C22.2 No. 250.0-08, ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, IP67, J61347-1,
J61347-2-13, BIS IS15885(for 24V only), EAC TP TC 004,GB/T19510.1,GB/T19510.213 approved ; design refer to UL60950-1
Withstand Voltage I/P-O/P:3.75KVAC
Isolation Resistance I/P-O/P:100M Ohms / 500VDC / 25℃/ 70% RH
EMC Emission Compliance to BS EN/EN55015,BS EN/EN61000-3-2 Class C (@load≧60%) ; BS EN/EN61000-3-3,GB/T 17743 , GB17625.1, EAC TP TC 020
EMC Immunity Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11; BS EN/EN61547, light industry level (surge immunity Line-Line 2KV), EAC TP TC 020

Others

MTBF 1202.9K hrs min. Telcordia SR-332 (Bellcore) ; 396.7Khrs min. MIL-HDBK-217F (25℃)
Dimension 162.5*43*32mm (L*W*H)
Packing 0.45Kg; 32pcs/15.4Kg/0.93CUFT

Constant current and constant voltage IP67 LED drivers convert AC mains power into DC power while offering complete protection against dust and temporary water immersion.

What is an IP67 Rating?

Dust-tight: Total protection against dust and solid objects.Waterproof: Withstands water immersion between 15 cm and 1 meter deep for up to 30 minutes.

Outdoor use: Ideal for exterior architectural lighting, wet locations, and garden setups.

Constant Voltage (CV) Drivers

Fixed output: Delivers a steady voltage, usually 12V or 24V DC.

Parallel wiring: LEDs or LED strips connect in parallel. Each strip gets the same voltage.

Best for: LED tape, rigid bars, and modules that have built-in current-limiting resistors.

Constant Current (CC) Drivers

Variable voltage: Adjusts its output voltage automatically to maintain a steady amperage.

Series wiring: LEDs connect in a single series chain so the exact same current passes through each chip.

Best for: High-power individual LEDs, COB (Chip-on-Board) modules, and architectural downlights.

Safety: Prevents thermal runaway because the driver regulates current fluctuations.

Established in 1982, headquartered in New Taipei City, MEAN WELL is a Standard Power Supply manufacturer and dedicated to developing specialized industrial power supplies solutions for decades.

Marketed worldwide with its own brand “MEAN WELL”, MEAN WELL power supply has been widely used in all industries and almost everywhere in your life. From home espresso machine, Gogoro electric scooter charging station, to the well-known landmark Taipei 101 skyscraper top lighting and Taoyuan International Airport jet bridge lighting, all of these you will surprisingly find MEWN WELL Power hidden inside, functioning as the heart of the machine, providing stable voltage and current for a long time, and powering up the whole machine and system to operate smoothly.

MEAN WELL Power has been widely used in different industries such as Industrial Automation, LED Lighting/ outdoor signage, Medical, Telecommuting, Transportation and Green Energy applications.

MEAN WELL has maintained a long term, solid relationship with our customers, suppliers, and employees in the spirit of “good intention” and “reliable partner” commitments since the company founded. Over the years, MEAN WELL has built hundreds of reliable partnership around the world.