Mean Well XLG-150-24-A – 150W 24V IP67 Protected LED Driver

XLG-150-24-A Technical Information

XLG-150-24-A Output

DC Voltage:24V
Constant Voltage Region:16.8~ 24V
Rated Current:6.25A
Rated Power:150W
Ripple & Noise (Max):240mVp-p
Current ADJ Range:3.2~ 6.25A
Voltage Tolerance:±2.0%
Line Regulation:±0.5%
Load Regulation:±1%
Set up Rise Time:500ms, 100ms/230VAC, 1200ms, 100ms/115VAC
Hold Up Time: 10ms/ 230VAC 10ms/ 115VAC

XLG-150-24-A Input

Voltage Range 100 ~ 305VAC 142 ~ 431VDC
Frequency Range 47 ~ 63Hz
Power Factor PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
Total Harmonic Distortion THD< 10%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
Efficiency (Typ.) 93%
AC Current 1.8A / 115VAC 1.0A / 230VAC 0.8A/277VAC
Inrush Current(Typ.)COLD START 50A(twidth=500μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
Max. No. of PSUs on 16A CIRCUIT BREAKER 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
Leakage Current <0.75mA / 277VAC
No Load Power Consumption No load power consumption <0.5W for A-Type

XLG-150-24-A Protection

Over Current 95 ~ 108% Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
Short Circuit Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
Over Voltage 27 ~ 34V Shut down output voltage, re-power on to recover
Input Over Voltage 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed)
Can survive input voltage stress of 440Vac for 48 hours @ tc 75℃ max
Over Temperature Shut down output voltage, re-power on to recover

XLG-150-24-A Environment

Working Temp Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
Max. Case Temp. Tcase=+90℃
Working Humidity 20 ~ 95% RH non-condensing
Storage Temp., Humidity -40 ~ +90℃, 10 ~ 95% RH
Temp. Coefficient±0.06%/℃ (0 ~ 60℃)
Vibration 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

Saftey & EMC

Safety Standards UL8750(type”HL”), UL879,CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384; GB19510.1,GB19510.14;EAC TP TC 004; J61347-1(H29), J61347-2-13(H29),KC61347-1,KC61347-2-13,IS15885(Part2/Sec13)(for XLG-150I type only); NOM-058-SCFI-2017(except for Blank type);IP67 approved
Withstand Voltage I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVA
Isolation Resistance I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH

Others

MTBF 712.17K hrs min. Telcordia SR-332 (Bellcore) ; 213.3Khrs min. MIL-HDBK-217F (25℃) 
Dimension 180*63*35.5mm (L*W*H
Packing 0.8Kg;16pcs / 13.4Kg /0.67CUFT

IP67 non-dimmable constant voltage LED drivers are fully waterproof power supplies designed to power LED setups (like LED strips or modules) that require a steady 12V or 24V DC output. Because they are non-dimmable, they provide a consistent, full-brightness output without flickering, making them ideal for outdoor displays, architectural lighting, and damp environments.

Core Specifications & Features

IP67 Rating: Fully sealed against dust and protected against the effects of temporary water immersion. These are perfect for gardens, bathrooms, wet rooms, and exterior signage.

Constant Voltage (CV): Ensures that the output voltage stays exactly the same (usually 12V or 24V) regardless of how many LEDs are connected.

Non-Dimmable: Built exclusively for “on/off” operation. This keeps the circuit simpler and the setup highly reliable.

Safety Protections: Typically include built-in safeguards against short circuits, overloads, over-voltage, and over-temperature.

Established in 1982, headquartered in New Taipei City, MEAN WELL is a Standard Power Supply manufacturer and dedicated to developing specialized industrial power supplies solutions for decades.

Marketed worldwide with its own brand “MEAN WELL”, MEAN WELL power supply has been widely used in all industries and almost everywhere in your life. From home espresso machine, Gogoro electric scooter charging station, to the well-known landmark Taipei 101 skyscraper top lighting and Taoyuan International Airport jet bridge lighting, all of these you will surprisingly find MEWN WELL Power hidden inside, functioning as the heart of the machine, providing stable voltage and current for a long time, and powering up the whole machine and system to operate smoothly.

MEAN WELL Power has been widely used in different industries such as Industrial Automation, LED Lighting/ outdoor signage, Medical, Telecommuting, Transportation and Green Energy applications.

MEAN WELL has maintained a long term, solid relationship with our customers, suppliers, and employees in the spirit of “good intention” and “reliable partner” commitments since the company founded. Over the years, MEAN WELL has built hundreds of reliable partnership around the world.