Mean Well XLN-60-H-B – Easily Programmable via The Mean Well App

XLN-60-H-B Technical Information 

XLN-60-H-B Output

Open Circuit Voltage 60V
Default Current 1400mA
Current ADJ Range (By NFC) 0.9-1.7A
Constant Current Region 9~54V
Rated Power 60W
Current Ripple <4%
Current Tolerance ±5%
Dimming Range 0~100%
Setup Rise Time 800ms,100ms/230VAC ,1000ms,100ms/115VAC

XLN-60-H-B Input

Voltage Range 100~305VAC 155~400VDC
Frequency Range 47 ~ 63Hz
Power Factor  PF≥0.95/115VAC, PF≥0.95/230VAC, PF≥0.9/277VAC@full load (Please refer to “POWER FACTOR (PF) CHARACTERISTIC” section)
Total Harmonic Distortion THD< 20%(@load ≥60%/230VAC; @load ≥75%/277VAC), THD<10%@load 100%/230VAC (Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)
Efficiency ( Typ ) 90%
AC Current 0.75A/115VAC, 0.35A/230VAC, 0.3A/277VAC
Inrush Current COLD START 15A(twidth=310μs measured at 50% Ipeak) at 230VAC; Per NEMA 410
Max. No of PSUs on 16A Circuit Breaker 25 units (circuit breaker of type B) / 36 units (circuit breaker of type C) at 230VAC
Leakage Current <0.75mA / 277VAC
Standby Power Consumption Standby power consumption<0.5W (Dimming off, only for standard version B/DA2-type)

XLN-60-H-B Protection

Short Circuit Hiccup mode, recovers automatically after fault condition is removed
Over Temperature DA2 type: Stage 1: Derating to 75% loading; stage2: Derating to 50% loading; Recovers automatically after fault condition is removed Blank & B type: Derating to lowest output level, Recovers automatically after fault condition is removed

Environment

Work Temp. Tcase=-25~90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
Max Case Temp. Tcase=90℃
Working Humidity Tcase=90℃
Storage Temp Humidity -40 ~ +80℃, 10 ~ 95% RH
Temp Coefficient ±0.03%/℃ (0 ~ 50℃)
Vibration 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

Safety & EMC

Safety Standards UL8750(type”HL” and Class P),CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13(EL) appendix J suitable for emergency installations(DC input 176-280VDC); BS EN/EN62384 independent, BIS IS15885(Part2/Sec13)(NOTE 13), GB19510.14, GB19510.1, EAC TP TC 004 approved; Design refer to AS/NZS 61347-1, AS/NZS 61347-2-13
DALI Standards Comply with IEC62386-101, 102, 207
With Standby Voltage I/P-O/P:3.75KVAC
Isolation Resistance I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH

XLN-60 Dimensions

Others

Flicker PstLM ≤ 1, SVM ≤ 0.4
MTBF 4053.7Khrs min. Telcordia SR-332 (Bellcore) 329.4Khrs min. MIL-HDBK-217F (25℃)
Dimension 141.5*49*32mm (L*W*H)
Packing 0.49Kg ; 30pcs/15.7Kg/0.81CUFT

Constant voltage IP67 LED drivers provide a stable, fixed DC output (usually 12V or 24V) to power LED strips and modules, featuring robust waterproofing against dust and water immersion up to 1m, making them ideal for outdoor, wet, or humid indoor environments. These drivers typically include safety features like short-circuit and overload protection, with power ratings ranging from low-wattage to over 400W.

Key Features of IP67 Constant Voltage Drivers

IP67 Rating: Completely sealed against dust and protected against temporary submersion in water, suitable for harsh outdoor conditions or bathrooms.

Constant Voltage Output: Maintains a steady 12V or 24V DC, which is necessary for LED products with built-in current-limiting resistors, such as flexible LED tape.

Robust Construction: Often housed in aluminium or potted, providing high durability and, in some cases, enhanced heat dissipation.

Safety Protections: Typically equipped with built-in protections against over-voltage, overloading, short-circuiting, and over-temperature to ensure longevity.

Efficiency: High-quality units often offer high efficiency (up to 95%) and power factors over 0.9, lowering energy consumption.

Typical Applications

Outdoor Lighting: Landscape lighting, garden, façade lighting, and sign illumination.

Indoor Wet Areas: Bathroom, kitchen under-cabinet, and sauna lighting.

LED Strip Installations: Suitable for long-run, constant voltage LED strip lights and signage.

Key Considerations

Wattage Load: Ensure the driver’s power rating exceeds the total wattage of the connected LED strip (it is advised not to run them at 100% capacity for extended periods).

Output Voltage: Must match the LED strip voltage (12V or 24V).

Dimming: While many are non-dimmable, specific models support dimming via external controllers.

Established in 1982, headquartered in New Taipei City, MEAN WELL is a Standard Power Supply manufacturer and dedicated to developing specialized industrial power supplies solutions for decades.

Marketed worldwide with its own brand “MEAN WELL”, MEAN WELL power supply has been widely used in all industries and almost everywhere in your life. From home espresso machine, Gogoro electric scooter charging station, to the well-known landmark Taipei 101 skyscraper top lighting and Taoyuan International Airport jet bridge lighting, all of these you will surprisingly find MEWN WELL Power hidden inside, functioning as the heart of the machine, providing stable voltage and current for a long time, and powering up the whole machine and system to operate smoothly.

MEAN WELL Power has been widely used in different industries such as Industrial Automation, LED Lighting/ outdoor signage, Medical, Telecommuting, Transportation and Green Energy applications.

MEAN WELL has maintained a long term, solid relationship with our customers, suppliers, and employees in the spirit of “good intention” and “reliable partner” commitments since the company founded. Over the years, MEAN WELL has built hundreds of reliable partnership around the world.