Tridonic 28000035 PCA 1×36 T8 ECO lp Y II – Huge UK Based Stock

28000035 Technical Data

Mains voltage range 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V (lamp start ≥ 198 V DC)
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
Typ. power input on standby < 0.2 W
Protective hot restart 0.5 s for AC / 0.2 s for DC
Dimming range 1 – 100 %
Lamp start possible from 1 %
Operating frequency ~ 40 – 130 kHz
Type of protection IP20

28000035 Wiring type and cross section

The wiring can be solid cable with a cross section of 0.5 to 0.75mm² for push terminal and 0.5mm² for IDC terminal. For the push-wire connection you have to strip the insulation (8–9mm).

RFI

• Connection to the lamps of the hot leads must be kept as short as possible
• Mains leads should be kept apart from lamp leads (ideally 5–10 cm distance)
• Do not run mains leads adjacent to the electronic ballast

• Twist the lamp leads
• Keep the distance of lamp leads from the metal work as large as possible
• Mains wiring to be twisted when through wiring
• Keep the mains leads inside the luminaire as short as possible

Wiring advice

The lead length is dependent on the capacitance of the cable. With standard solid wire 0.5/0.75mm² the capacitance of the lead is 30–80 pF/m.

This value is influenced by the way the wiring is made.

Lamp connection should be made with symmetrical wiring.

Hot leads (10, 11, 15, 16) and cold leads (12, 13, 14) should be separated as much as possible.

When using two or more dimmable ballasts in one luminaire with separate dimming controls, the lamp leads must be kept separate.

Sensor wires

Sensor wires must be routed separately from the lamp wires and mains cables otherwise the lighting control system may malfunction.

If separate routing is not possible (for reasons of space) shielded lamp wires and mains cables must be used.Dimmable ballasts from Tridonic have to be earthed

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.