Tridonic 28002465 LC 38W 250-350mA flexC lp ADV – Limited Stock

28002465 Common Data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V
Max. input current (at 230 V, 50 Hz, full load) 0.2 A
Typ. input current (at 230 V, 0 Hz, full load) 0.2 A
Leakage current (at 230 V, 50 Hz, full load) < 450 µA
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Max. input power 43 W
Typ. power consumption (at 230 V, 50 Hz, full load) 42.5 W
Min. output power 12.8 W
Max. output power 38 W
Typ. efficiency (at 230 V, 50 Hz, full load) 1 88.5 %
λ (at 230 V, 50 Hz, full load) 1 0.95

Output current tolerance 2 ± 7.5 %
Max. output current peak 3 ≤ output current + 10 %
Max. output voltage (U-OUT) 250 V
THD (at 230 V, 50 Hz, full load) < 20 %
Output LF current ripple (< 120 Hz) ± 5 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Starting time (at 230 V, 50 Hz, full load) < 0.5 s
Starting time (DC mode) < 1 s
Switchover time (AC/DC) 4 < 0.5 s

Turn off time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Hold on time at power failure (output) 0 s
Ambient temperature ta (at lifetime 100,000 h) 40 °C
Storage temperature ts -40 … +80 °C
Lifetime up to 100,000 h
Dimensions L x W x H 280 x 30 x 21 mm
Hole spacing D 268 mm

28002465 Wiring

28002465 Wiring type and cross section

For wiring use stranded wire with ferrules or solid wire from 0.5 – 1.5 mm².
Strip 8.5 – 9.5 mm of insulation from the cables to ensure perfect operation of the push-wire terminals

28002465 Installation instructions

The LED module and all contact points within the wiring must be sufficiently insulated against 3 kV surge voltage.
Air and creepage distance must be maintained.

28002465 Wiring guidelines

• All connections must be kept as short as possible to ensure good EMI behaviour.
• Mains leads should be kept apart from LED driver and other leads (ideally 5 – 10 cm distance)
• Max. length of output wires is 2 m.
• Incorrect wiring can damage LED modules.
• To avoid the damage of the Driver, the wiring must be protected against short circuits to earth (sharp edged metal parts, metal cable clips, louver, etc.).
• The current selection has to be installed in the accordance to the requirement of low voltage installation.

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.