Tridonic 28002485 LC 35W 700mA fixC SC ADV – Limited Stock

28002485 Common Data

Part number LC 35W 700mA fixC SC ADV 28002485

28002485 Technical Data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
Mains frequency 50 / 60 Hz
Overvoltage protection 320 V AC, 1 h
THD (at 230 V, 50 Hz, full load) < 20 %
Output current tolerance 1 ± 7.5 %
Typ. current ripple (at 230 V, 50 Hz, full load) ± 5 %

Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Max. output voltage (U-OUT) 60 V
Starting time (at 230 V, 50 Hz, full load) ≤ 0.5 s
Turn off time (at 230 V, 50 Hz, full load) ≤ 0.2 s
Hold on time at power failure (output) 0 s
Ambient temperature ta -20 … +50 °C
Ambient temperature ta (at lifetime 50,000 h) 40 °C
Storage temperature ts -40 … +80 °C
Lifetime up to 50,000 h
Dimensions L x W x H 97 x 43 x 30 mm
Dimensions with strain-relief L x W x H 157 x 43 x 30 mm

28002485 Wiring

28002485 Wiring type and cross section

For wiring use stranded wire with ferrules or solid wire from 0.5 – 1.5 mm².
Strip 8.5 – 9.5 mm of insulation from the cables to ensure perfect operation of the push-wire terminals

28002485 Installation instructions

The LED module and all contact points within the wiring must be sufficiently insulated against 3 kV surge voltage.
Air and creepage distance must be maintained.

28002485 Wiring guidelines

• All connections must be kept as short as possible to ensure good EMI behaviour.
• Mains leads should be kept apart from LED driver and other leads (ideally 5 – 10 cm distance)
• Max. length of output wires is 2 m.
• Incorrect wiring can damage LED modules.
• To avoid the damage of the Driver, the wiring must be protected against short circuits to earth (sharp edged metal parts, metal cable clips, louver, etc.).
• The current selection has to be installed in the accordance to the requirement of low voltage installation.

Compact, non-dimmable constant current LED drivers are compact power supplies designed to deliver a fixed, steady current (mA) to LEDs, ensuring consistent brightness and longevity. They are ideal for space-constrained, fixed-intensity applications like downlights, under-cabinet lighting, and spot lighting. These drivers prevent flickering and overheating, often featuring lightweight, plastic cases.

Key Aspects of Compact Non-Dimmable Constant Current Drivers

Performance: They deliver a fixed current (e.g., 350mA, 700mA) regardless of voltage fluctuations, ensuring consistent brightness.

Applications: Ideal for, but not limited to, LED downlights, spot lights, and signage where dimming is not required.

Design & Size: Specifically engineered to be small, making them suitable for installations with limited space, such as recessed fixtures.

Safety Features: Often equipped with protections against short circuits, overloads, and high temperatures.

Input/Output: Typically convert high-voltage AC mains to low-voltage DC, suited for series-connected LEDs.

Common Ratings: Available in various power levels, such as 15W compact models for small-scale projects.

Why Choose Non-Dimmable?

Reliability: Without dimming components, these drivers are highly reliable for applications requiring continuous, full-power illumination.

Cost-Effective: Often more economical than dimmable alternatives.

Simplicity: Simple installation for, e.g., task lighting where brightness levels are fixed.

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.