Tridonic 87500658 LCA 160W 350-1050mA one4all C PRE OTD

87500658 COMMON DATA

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Typ. current (at 230 V, 50 Hz, full load) 12 529 – 751 mA
Typ. current (220 V, 0 Hz, full load, 15 % dimming level) 2 107 – 132 mA
Leakage current (at 230 V, 50 Hz, full load) 12 < 380 µA
Max. input power 172.5 W
Typ. efficiency (at 230 V, 50 Hz, full load) 2 94 %
λ (at 230 V, 50 Hz, full load) 1 0.99
Typ. power consumption on stand-by 3 < 0.15 W
In-rush current (peak / duration) 84 A / 255 µs
THD (at 230 V, 50 Hz, full load) 1 < 4.2 %
Starting time (at 230 V, 50 Hz, full load) 1 < 640 ms
Starting time (DC mode) < 500 ms
Switchover time (AC/DC) 4 < 80 ms
Turn off time (at 230 V, 50 Hz, full load) < 20 ms
Output current tolerance 15 ± 3 %
Max. output current peak (non-repetitive) ≤ output current + 40 %
Output LF current ripple (< 120 Hz) ± 4.5 %
Max. output voltage (U-OUT) 400 V
Dimming range 10 – 100 %
Mains surge capability (between L – N) 6 kV / 3 kA
Mains surge capability (between L/N – PE) 6 kV
Mains surge capability up to (between L/N – PE) without DALI connection 10 kV
Burst protection 7 6 kV
Surge voltage at output side (against PE) < 500 V
Type of protection IP20
Lifetime up to 100,000 h
Guarantee (conditions at www.tridonic.com) 5 Year(s)
Dimensions L x W x H 170 x 100 x 40 mm

87500658 Wiring

87500658 Wiring type and cross section

Input side:
Solid wire with a cross section of 0.5 – 2.5 mm². Strip 10 – 11 mm of insulation from the cables to ensure perfect operation of terminals.

Output side:
Solid wire with a cross section of 0.2 – 1.5 mm². Strip 8.5 – 9.5 mm of insulation from the cables to ensure perfect operation of terminals.

Wiring guidelines
• The cables should be run separately from the mains connections and mains cables to ensure good EMC conditions.
• The LED wiring should be kept as short as possible to ensure good EMC.

The max. secondary cable length is 3 m (6 m circuit), this applies for LED output as well as for I-SELECT 2.

• Secondary switching is not permitted.
• The LED Driver has no inverse-polarity protection on the secondary side.
• Wrong wiring of the LED Driver can lead to malfunction or irreparable damage.
• To avoid the damage of the Driver, the wiring must be protected against short circuits to earth (sharp edged metal parts, metal cable clips, louver,
etc.).

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.