Tridonic 87500920 LCI 105W 250-1050mA 300V flexC NF lp EXC3

87500920 Technical data

Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Typ. rated current (at 230 V, 50 Hz, full load) 12 495 mA
Typ. current (220 V, 0 Hz, full load, EOFx dimlevel) 12 520 mA
Leakage current (at 230 V, 50 Hz, full load) 12 < 500 µA

Max. input power 114 W
Typ. efficiency (at 230 V, 50 Hz, full load) 2 94 %
λ (at 230 V, 50 Hz, full load) 1 0.95
Typ. input current in no-load operation 50 mA
Typ. input power in no-load operation 0.7 W
In-rush current (peak / duration) 5 A / 1,000 µs
THD (at 230 V, 50 Hz, full load) 1 < 10 %
Starting time (at 230 V, 50 Hz, full load) 1 < 0.5 s
Starting time (DC mode) < 0.5 s
Switchover time (AC/DC) 3 < 0.5 s
Turn off time (at 230 V, 50 Hz, full load) < 30 ms
Output current tolerance 14 ± 3 %
Max. output current peak (non-repetitive) 1,500 mA

Output LF current ripple (< 120 Hz) 1 ± 2 %
Output P_ST_LM (at full load) ≤ 1
Output SVM (at full load) ≤ 0.4
Max. output voltage (U-OUT) 350 V
Mains surge capability (between L – N) 4 kV
Mains surge capability (between L/N – PE) 4 kV
Surge voltage at output side (against PE) 4 kV
Type of protection IP20
Lifetime up to 100,000 h
Dimensions L x W x H 360 x 30 x 21 mm

87500920 WIRING

87500920 Wiring type and cross section

For wiring use solid wire from 0.5 – 1.5 mm².

Strip 8.5 – 9.5 mm of insulation from the cables to ensure perfect operation of terminals.

Wiring guidelines

• The cables should be run separately from the mains connections and mains cables to ensure good EMC conditions.
• The LED wiring should be kept as short as possible to ensure good EMC.

The max. secondary cable length is 2 m (4 m circuit), this applies for LED output as well as for I-SELECT 2.
• Secondary switching is not permitted.
• The LED driver has no inverse-polarity protection on the secondary side.

Wrong polarity can damage LED modules with no inverse-polarity protection.

• Wrong wiring of the LED driver can lead to malfunction or irreparable damage.
• With mains transients of 4 kV can voltage peaks up to 4 kV occur against PE at the output of the LED driver. This has to be considered concerning the dielectric strength of the LED module (insulation against PE).
• To avoid damage of the Driver, the wiring must be protected against short circuits to earth (sharp edged metal parts, metal cable clips, louver, etc.).

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.