Tridonic 89800577 EMconverterLED BASIC 204 MH/LiFePO4 50V

89800577 Common Data

Rated supply voltage 220 – 240 V
Mains frequency 50 / 60 Hz
Forward voltage range LED module 10 – 54 V
Output current Refer to data sheet
Starting time < 0.5 s from detection of emergency event
Overvoltage protection 320 V (for 48 h)
U-OUT (including open- / short-circuit and double load) 60 V
Max. open circuit voltage 60 V
Battery charging time 24 h
Ambient temperature ta -5 … +55 °C
Max. casing temperature tc 75 °C
Mains voltage changeover threshold According to EN 60598-2-22
Mains surge capability (between L – N) 1 kV
Mains surge capability (between L/N – PE) 2 kV
Type of protection IP20
Lifetime up to 100,000 h
Dimensions L x W x H 179 x 30 x 21 mm

89800577 Wiring

89800577 Wiring type and cross section

Solid wire with a cross section of 0.5 – 1.5 mm². Strip 8 – 9 mm of insulation from the cables to ensure perfect operation of terminals.

Wiring: LED module/LED driver/supply

89800577 Wiring guidelines

• The LED terminals, battery, indicator LED and test switch terminals are classified as SELV (output voltage < 60 V DC). Keep the wiring of the input terminals separated from the wiring of the SELV classified terminals or consider special wiring (double insulation, 6 mm creepage and clearance) when these connections should be kept SELV.

• The output to the LED is DC but has high frequency content, which should be considered for good EMC compliance.

• Separate LED leads from the mains and DALI connections and wiring for good EMC performance.

• Maximum lead length on the LED terminals is 3 m. For a good EMC performance keep the LED wiring as short as possible.

• Route the secondary wires (LED module) in parallel to ensure good EMC performance.

• Maximum lead length for the Test switch and Indicator LED connection is 1 m. Separate the test switch and Indicator LED wiring from the LED leads to prevent noise coupling.

• Battery leads are specified with 0.5 mm cross section and a length of 0.8 m

• Protect the wiring against short circuits to earth (sharp edged metal parts, metal cable clips, louver, etc.) to avoid the damage of the control gear.

Tridonic are a Zumtobel Group company, founded in 1956 in Dornbirn, Austria. For more than 60 years, they have been a driving force in the development of professional lighting solutions.

Today, Tridonic is a world-leading provider of lighting technology for professional applications, including office buildings, and retail outlets, hotels and restaurants, the education industry and outdoor lighting sectors.

In Tridonics’ extensive range of energy-efficient dimmable and non-dimmable LED drivers they offer the right products for every indoor and outdoor application – from cost-efficient LED drivers in proven Tridonic quality to premium products that give you maximum flexibility and convenience.

Tridonics’ dimmable LED drivers can be controlled with different analog and digital dimming signals. Tridonic basicDIM Wireless products allow wireless control without additional wiring.