Philips 929001669506 Xitanium 100W 24V LED Driver – Huge UK based stock

929001669506 Operating and Electrical Data

929001669506 Electrical input data

Rated input voltage range 108…132 202…254 Vac Performance range
Rated input voltage 120 230 Vac
Rated input frequency range 47…63 47…63 Hz Performance range
Rated input current 0.99 0.5 A @ rated output power @ rated input voltage
Max. input current 1.1 0.56 A @ rated output power @ minimum performance input voltage

Rated input power 118 113 W @ rated output power @ rated input voltage
Power factor 0.99 0.97 @ rated output power @ rated input voltage
Total harmonic distortion 10 11.5 % @ rated output power @ rated input voltage
Efficiency 86 88 % @ rated output power @ rated input voltage
Input voltage AC range 108…132 198…264 Vac Safety operational range
Input frequency AC range 45…66 45…66 Hz Safety operational range
Isolation input to output UL Class 2 / SELV UL Class 2 / SELV

929001669506 Electrical output data

Regulation method Constant Voltage
Output voltage 24 Vdc Output voltage range: 23.5 … 25.6VDC
Output voltage max. 35 V
Output current 0.1…4.16 A
Output voltage ripple ≤ 230 mVpp
Output power 2.4…100 W
Line regulation ≤ 0.1 %
Load regulation ≤ 1 %
Turn-on delay ≤ 0.25 s With Integrade engine 24VDC module at rated output power
Output voltage rise time ≤ 30 ms
Hold-up time ≥ 45 ms

929001669506 Electrical data controls input

Control method Fixed

929001669506 Wiring and Connections

Input wire cross-section 0.75 / 19 mm2 / AWG Solid wire
Output wire cross-section 0.75 / 19 mm2 / AWG Solid wire
Maximum cable length 2.5 m Total cable length between driver and LED modules

929001669506 Insulation

Mains UL Class 2 / SELV Double
LED output UL Class 2 / SELV Basic
Housing Double Basic

Dimensions and weight

Length (A1) 241.3 mm
Mounting hole distance (A2) 228.6 mm
Length (A3) 213.2 mm
Width (B1) 43.1 mm
Width (B2) 26.6 mm
Height (C1) 30 mm
Mounting hole diameter (D1) 6.35 mm
Weight 640 gram

Driver touch current / protective conductor current

Typical Touch Current (ins. Class II) 0.6 mA peak Acc. IEC61347-1. LED module contribution not included
Typical Protective Conductor Current (ins. Class I) 0.4 mA rms Acc. IEC60598-1. LED module contribution not included
Earth Leakage Current 0.75 mA rms

Surge immunity

Mains surge immunity (diff. mode) 1 kV L – N, 1kV acc. IEC61000-4-5; 1.5kV acc. ANSI comb. wave 2 Ohm, 6kV acc. ANSI 100kHz ring wave 30 Ohm
Mains surge immunity (comm. mode) 2 kV L/N – GND, 2kV acc. IEC61000-4-5, 12Ohm; 2kV acc. ANSI 100kHz ring wave 30 Ohm

Application Info

Approval marks CCC / CE / CSA / Double-insulated / ENEC / RCM / SELV / UL Class 2 / UL Recognized US & Can / VDE / VDE household / VDE-EMC
Ingress Protection classification (IP) 20
Application Indoor Constant Voltage
Mounting Type Built-in

Operational temperatures and humidity

Ambient temperature -30…+60 ºC Higher ambient temperature allowed as long as Tcase-max is not exceeded
Tcase-max 90 ºC Maximum temperature measured at Tcase-point
Tcase-life 80 ºC Measured at Tcase-point
Maximum housing temperature 120 ºC In case of a failure, inherent by design
Relative humidity 10…90 % Non-condensing

929001669506 Logistical data

Product name LED Power Driver 100W 24V 120-240V
EOC 694793914959900
Logistic code 12NC 9290 016 69506
EAN1 (GTIN) 6947939149599
Pieces per box 10

Operational temperatures and humidity

Ambient temperature -30…+60 ºC Higher ambient temperature allowed as long as Tcase-max is not exceeded
Tcase-max 90 ºC Maximum temperature measured at Tcase-point
Tcase-life 80 ºC Measured at Tcase-point
Maximum housing temperature 120 ºC In case of a failure, inherent by design
Relative humidity 10…90 % Non-condensing

The Tridonic equivalent is also stocked (28004374)

Constant voltage LED drivers are specialized power supplies that convert high-voltage AC input (e.g., 230V AC) to a stable, low-voltage DC output, typically 12V or 24V DC. They are primarily used to power LED strip lights, under-cabinet lighting, and constant voltage LED modules, ensuring optimal brightness and reliability.

Key Aspects of Constant Voltage LED Drivers:

Application: Ideal for parallel-connected LED lighting, such as LED tapes and strips, requiring a consistent voltage (usually 12V or 24V) regardless of the load.

Output Consistency: These drivers maintain a steady voltage, even if the total wattage load fluctuates.

Compatibility: They work best for LED products that have internal current-limiting resistors.

Safety and Features: Many drivers offer IP ratings for indoor (IP20/IP40) or outdoor (IP67) use and feature dimming capabilities like DALI, 1-10V, or TRIAC.

Selection Criteria: When selecting a driver, it is important to ensure the total wattage of the LED load does not exceed the driver’s maximum wattage capacity.

Common Types: These include hardwired, plugin, and magnetic drivers used for commercial and residential applications.

Using a constant voltage driver ensures the proper operation and long lifespan of LED products designed to run on 12V or 24V DC.

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.