Philips 929003931306 LED Power Driver 100u 24V 120V-277V – Global Approbations and Aertifications

929003931306 Logistical data

Product name LED Power Driver 100u 24V 120V-277V
Logistic code 12NC 929003931306
Pieces per box 10
Weight 575 gram

929003931306 Electrical input data

Rated input voltage range 108…132 202…254 249…305 Vac Performance range
Rated input voltage 120 230 277 Vac
Rated input frequency 50…60 50…60 50…60 Hz Performance range
Rated input current 0.9 0.47 0.39 A @ rated output power @ rated input voltage
Max. input current 1.1 0.55 0.45 A @ rated output power @ minimum performance input voltage
Rated input power 109.0 106.0 106.0 W @ rated output power @ rated input voltage

Power factor 0.98 0.98 0.98 @ rated output power @ rated input voltage
Total harmonic distortion 10 10 10 % @ rated output power @ rated input voltage
Efficiency 88.0 90.0 90.0 % @ rated output power @ rated input voltage
Input voltage AC 108…132 198…264 249…305 Vac Operational range
Input frequency AC 45…66 45…66 45…66 Hz Operational range
Isolation input to output UL Class 2 / SELV UL Class 2 / SELV UL Class 2 / SELV

929003931306 Electrical output data

Regulation method Constant Voltage
Output voltage 24 Vdc Output voltage range: 22.8 … 25.2VDC
Output voltage max. 26 V
Output current 100…4000 mA Output current performance range: 800…4000mA
Output voltage ripple ≤ 1 % < 240 mVpp
Output power 2.4…96.0 W Output power performance range: 20…96W
Line regulation ≤ 1 %
Load regulation ≤ 3 %
Turn-on delay ≤ 0.5 s
Output voltage rise time ≤ 50 ms
Hold-up time ≥ 10 ms

Control interfaces

Control method Fixed

Wiring and Connections

Input wire cross-section 0.75 / 19 mm2 / AWG Solid wire
Output wire cross-section 0.75 / 19 mm2 / AWG Solid wire
Maximum cable length 2.5 m Total cable length between driver and LED modules

Isolation

Mains – SELV Double
LED output SELV – Double
Housing Double Double –

929003931306 Dimensions and weight

Length (A1) 241.3 mm
Mounting hole distance (A2) 228.6 mm
Length (A3) 213.2 mm
Width (B1) 43.1 mm
Width (B2) 26.6 mm
Height (C1) 30 mm
Mounting hole diameter (D1) 6.4 mm
Mounting hole diameter (D2) 8.2 mm
Weight 575 gram

Operational temperatures and humidity

Ambient temperature -30…+60 ºC Higher ambient temperature allowed as long as Tcase-max is not exceeded
Tcase-max 90 ºC Maximum temperature measured at Tcase-point
Tcase-life 80 ºC Measured at Tcase-point
Maximum housing temperature 110 ºC In case of a failure, inherent by design
Relative humidity 10…90 % Non-condensing

Lifetime

Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10%

Storage temperature and humidity

Ambient temperature -40…+85 ºC
Relative humidity 5…95 % Non-condensing

Non-programmable features

Open load protection Yes Automatic recovering
Short circuit protection Yes Hiccup mode, automatic recovering
Over power protection Yes Automatic recovering
Hot wiring Yes No load power <0.5W
Suitable for fixtures with protection class I and II per IEC60598
Overtemperature protection Yes Automatic recovering

Inrush current

Inrush current 44.7 A Input voltage 230V
Inrush peak width 190 µs Input voltage 230V, measured at 50% height
Drivers / MCB 16A type B @230V AC ≤ 13 pcs Input voltage 230V

Driver touch current / protective conductor current / earth leakage current

Typical Protective Conductor Current (ins. Class I) 0.5 mA rms Acc. IEC60598-1. LED module contribution not included
Earth Leakage Current 0.7 mA rms

Surge immunity

Mains surge immunity (diff. mode) 1 kV L – N, 1kV acc. IEC61000-4-5; 1.5kV acc. ANSI comb. wave 2 Ohm, 6kV acc. ANSI 100kHz ring wave 30 Ohm
Mains surge immunity (comm. mode) 2 kV L/N – GND, 2kV acc. IEC61000-4-5, 12Ohm; 1.5kV acc. ANSI comb. wave 2 Ohm, 3kV acc. ANSI 100kHz ring wave 30 Ohm

Application Info (Approbation)

Approval marks and Certifications 110 / CB / CCC / CE / Double-insulated Built-In / ENEC / RCM / SELV / UKCA / UL Class 2 / UL Listed US & Can
Ingress Protection classification (IP) 20
Noise and hum dB(A) 20
Application Indoor Constant Voltage
Mounting Type Built-in

Constant voltage LED drivers are specialized power supplies that convert high-voltage AC input (e.g., 230V AC) to a stable, low-voltage DC output, typically 12V or 24V DC. They are primarily used to power LED strip lights, under-cabinet lighting, and constant voltage LED modules, ensuring optimal brightness and reliability.

Key Aspects of Constant Voltage LED Drivers:

Application: Ideal for parallel-connected LED lighting, such as LED tapes and strips, requiring a consistent voltage (usually 12V or 24V) regardless of the load.

Output Consistency: These drivers maintain a steady voltage, even if the total wattage load fluctuates.

Compatibility: They work best for LED products that have internal current-limiting resistors.

Safety and Features: Many drivers offer IP ratings for indoor (IP20/IP40) or outdoor (IP67) use and feature dimming capabilities like DALI, 1-10V, or TRIAC.

Selection Criteria: When selecting a driver, it is important to ensure the total wattage of the LED load does not exceed the driver’s maximum wattage capacity.

Common Types: These include hardwired, plugin, and magnetic drivers used for commercial and residential applications.

Using a constant voltage driver ensures the proper operation and long lifespan of LED products designed to run on 12V or 24V DC.

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.