Philips 929002873106 XI FP 110W 0.2-0.7A SNLDAE 230V C133 sXt – Ultimate Robustness

929002873106 Electrical Data

929002873106 Electrical Input Data

Rated input voltage range 202…254 Vac Performance range
Rated input voltage 230 Vac
Rated input frequency range 47…63 Hz Performance range
Rated input current 0.54 A @ rated output power @ rated input voltage
Max. input current 0.6 A @ rated output power @ minimum performance input voltage
Rated input power 121 W @ rated output power @ rated input voltage
Power factor 0.99 @ rated output power @ rated input voltage

Total harmonic distortion 6 % @ rated output power @ rated input voltage
Efficiency 92.5 % @ rated output power @ rated input voltage @ max. Uout
Rated input voltage DC range 186…250 Vdc Performance range
Rated input current DC range 0.39 Adc Performance range
Input voltage AC range 80…264 Vac Safety operational range
Input frequency AC range 45…66 Hz Safety operational range
Input voltage DC range 168…275 Vdc Safety operational range
Standby Power 0.46 W
Isolation input to output Reinforced

929002873106 Electrical output data

Regulation method Constant Current
Output voltage 70…220 Vdc
Output voltage max. 300 V Maximum voltage at open load
Output current 0.05…0.7 A
Output current min programmable 200 mA
Output current min dimming 50 mA
Output current tolerance ± 3 %
Output current ripple LF ≤ 4 % Ripple = peak / average < 3kHz
Output current ripple HF ≤ 4 %
Output Pst LM ≤ 0.06 In entire operating window
Output SVM ≤ 0.07 In entire operating window
Output power 4…110 W

929002873106 Electrical data controls input

Control method AmpDim, Coded Mains, DALI, Dynadimmer, LineSwitch 3-step, LineSwitch single-step Output current amplitude dimming. Please refer to design-in guide at www.philips.com/oem for more controllability details.
Dimming range 10…100 % For latest DALI certification status please visit www.digitalilluminationinterface.org/products; LineSwitch: Vlow: < 160Vac Vhigh: 170 … 264Vac
Isolation controls input to output Reinforced acc. IEC61347-1

929002873106 Wiring and Connections

Input wire cross-section 0.5…1.5 / 20…16 mm2 / AWG solid / stranded wire
Input wire strip length 8.5…9.5 mm
Output wire cross-section 0.5…1.5 / 20…16 mm2/ AWG solid / stranded wire
Output wire strip length 8.5…9.5 mm
Control wire cross-section 0.5…1.5 / 20…16 mm2 / AWG solid / stranded wire
Control wire strip length 8.5…9.5 mm
Maximum cable length 0.6 m CISPR15: between driver and LED module
Maximum NTC output cable length 0.6 m

Insulation

Mains + LineSwitch Reinforced Reinforced Reinforced
EQUI Reinforced Basic Reinforced
LED + NTC Reinforced Basic Reinforced
DALI Reinforced Reinforced Reinforced

929002873106 Dimensions and weight

Length (A1) 133 mm
Mounting hole distance (A2) 122 mm
Width (B1) 77 mm
Height (C1) 39.5 mm
Mounting hole diameter (D1) 4.2 mm
Weight 600 gram

Logistical data

Product name Xi FP 110W 0.2-0.7A SNLDAE 230V C133 sXt
EOC 871951434480800
Logistic code 12NC 929002873106
EAN1 (GTIN) 8719514344808
EAN3 (box) 8719514344815
Pieces per box 12

Operational temperatures and humidity

Ambient temperature -40…+55 ºC Higher ambient temperature allowed as long as Tcase-max is not exceeded
Tcase-max 85 ºC Maximum temperature measured at Tcase-point
Tcase-life 75 ºC Measured at Tcase-point
Maximum housing temperature 130 ºC In case of a failure, inherent by design
Relative humidity 10…90 % Non-condensing

929002873106 Lifetime

Driver lifetime 100,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10%

Storage temperature and humidity for the 929002873106

Ambient temperature -40…+85 ºC
Relative humidity 5…95 % Non-condensing

Programmable features

Set Adjustable Output Current (AOC) Programmable, SimpleSet 700 mA
LED Module Temperature Protection (MTP) Yes OFF
Driver Temperature Limit (DTL) Yes ON
Adjustable Light Output (ALO) Yes OFF
Constant Light Output (CLO) Yes OFF
Adjustable Start-up Time (AST) Yes 1 s
DALI 253 M Yes —
Integrated Dynadimmer Yes OFF 5-step, light turn-off possible
LineSwitch single-step Yes ON
LineSwitch 3-step Yes OFF
AmpDim Yes OFF
Min Dim Level Yes 10 %
DC emergency (DCemDim) Yes ON Default: AOC = 15%. EOFx = 10 … 60%. No external DC rated fuse required. Internal fuse rating: T6.3A 250VAC/DC.
End Of Life indicator (EOL) Yes OFF
Coded Mains Yes OFF
OEM Write Protection (OWP) Yes OFF
Luminaire Info (DALI part 251) Yes —

929002873106 Features

Open load protection Yes Automatic recovering
Short circuit protection Yes Automatic recovering
Over power protection Yes Automatic recovering
Hot wiring No
Suitable for fixtures with protection class I and II per IEC60598
Overtemperature protection Yes Automatic recovering
Energy metering (DALI part 252) Yes Accuracy = 10%
Diagnostics Yes
Diagnostics (DALI part 253) Yes

Inrush current

Inrush current 47/250 A/μs Input voltage 230V
Drivers / MCB 16A type B ≤ 10 pcs Indicative value

Driver touch current / protective conductor current

Typical Touch Current (ins. Class II) 0.24 mA peak Acc. IEC61347-1. LED module contribution not included
Typical Protective Conductor Current (ins. Class I) 0.17 mA rms Acc. IEC60598-1. LED module contribution not included

Surge immunity

Mains surge immunity (diff. mode) 6 kV L-N, Ls-L, Ls-N, acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Mains surge immunity (comm. mode) 10 kV L/N/Ls – EQUI 10kV acc. EN61547; 8kV acc. IEC61000-4-5, 12 Ohm 1.2/50us,8/20us
Control surge immunity (diff. mode) 0.9 kV DALI – DALI acc. IEC61000-4-5. 2 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 6 kV DALI – EQUI acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us
Control surge immunity (comm. mode) 8 kV DALI – L/N/Ls acc. IEC61000-4-5. 12 Ohm, 1.2/50us, 8/20us

Application Info

Approval marks CCC / CE / DALI 2 / Double-insulated Built-In / EAC / EL / ENEC / UA / UKCA / WEEE
Ingress Protection classification (IP) 20
Application Outdoor
Mounting Type Built-in

DALI (Digital Addressable Lighting Interface) LED drivers for street lighting enable intelligent, networked control of outdoor luminaires, allowing for individual addressability, precise dimming, and bidirectional communication for monitoring status and energy usage. These drivers support energy-saving initiatives through scheduling, motion sensors, and light sensors, optimizing brightness based on traffic or time.

Key Aspects of DALI Street Lighting Drivers

DALI-2 & D4i Standards: Modern street lighting drivers adhere to DALI-2 for interoperability and D4i (DALI inside) for enhanced smart city capabilities, specifically providing power for sensors and communication modules.

Intelligent Dimming & Control: Drivers allow for group or individual control, facilitating dimming during low-traffic hours to reduce energy consumption.

Durability & Performance: Designed for outdoor conditions, these drivers usually feature high IP ratings (e.g., IP66), surge protection, and wide operating temperature ranges.

Bi-directional Communication: Enables remote diagnostics, allowing maintenance crews to monitor performance, detect failures, and check power usage, rather than relying on visual inspections.

Constant Current/Voltage: Most outdoor DALI drivers are constant current, tailored to drive LED modules efficiently.

Commonly used with smart lighting systems, these drivers connect with systems like Tridonic to form a robust, energy-efficient infrastructure.

Philips is one of the world’s most trusted lighting brands. Since 1891, Philips has been synonymous with high-quality, reliable, innovative technology that improve people’s lives.
The Philips brand is licensed to Signify, world leader in lighting, for lighting products and services. Philips is Signify’s primary brand for lamps, luminaires, and other lighting products for both professionals and consumers.

Signify products carrying the Philips brand cover the complete range of lighting applications, from home, office, and industry to street lighting, horticulture, sports, and more.

Signify is the world leader in lighting. They provide professional customers and consumers with quality products, systems and services. And their connected lighting offerings bring light and the data they collect to devices, places and people – redefining what light can do and how people use it. Their innovations contribute to a safer, smarter more sustainable world.

Signify is the world leader in lighting for professionals, consumers and lighting for the Internet of Things. Their energy efficient lighting products, systems and services enable their customers to enjoy a superior quality of light, and make people’s lives safer and more comfortable, businesses more productive and cities more liveable.

With 2024 sales of EUR 6.1 billion, approximately 29,000 employees and a presence in over 70 countries, they are unlocking the extraordinary potential of light for brighter lives and a better world.