Mean Well APV-35-12

APV-35-12 Technical Data

APV-35-12 Electrical Data

Part Number: APV-35-12

APV-35-12 Output

DC Voltage: 12V
Rated Current: 3A
Current Range: 0 – 0.3A
Rated Power: 36W
Ripple & Noise (max.): 150m Vp-p
Voltage Tolerance: +5.0%
Line Regulation: +1.0%
Load Regulation: +2.0%
Setup Rise Time: 1500ms, 40ms/230VAC 1500ms,40ms/115VAC at full load
Hold Up Time:20ms/230VAC at full load 12ms/115VAC at full load

APV-35-12 Input

Voltage Range: 90 ~ 264VAC 127 ~ 370VDC
Frequency Range: 47 ~ 63Hz
Efficiency (Typ.): 83%
AC Current: 0.5A/230VAC 0.75A/115VAC
Inrush Current (Typ.): COLD START 45A(twidth=440μs measured at 50% Ipeak) at 230VAC
Max. No. of PSUs on 16A Circuit Breaker: 6 units (circuit breaker of type B) / 10 units (circuit breaker of type C) at 230VAC
Leakage Current: 0.25mA / 240VAC

Protection

Over Load: 110%~160% rated output power. Protection type : Hiccup mode, recovers automatically after fault condition is removed
Over Voltage: 13.8 ~ 16.2V Protection type : Shut off o/p voltage, clamping by zener diode

Environment

Working Temp:-30 ~ +70℃ (Refer to “Derating Curve”)
Working Humidity: 20 ~ 90% RH non-condensing
Storage Temp, Humidity: -40 ~ +80℃ , 10 ~ 95% RH
Temp, Coefficient: ±0.03%/℃ (0 ~ 50℃)
Vibration: 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

Safety & EMC

Safety Standards: UL8750 , CSA-C22.2 No. 250.0-13, BIS IS15885, EAC TP TC 004,IP42 , BS EN/EN 62368-1 approved
Withstand Voltage: I/P-O/P:3KVAC
Isolation Resistance: I/P-O/P:>100M Ohms / 500VDC / 25℃/ 70% RH
EMC Emission: Compliance to BS EN/EN55032,BS EN/EN61000-3-2 Class A,BS EN/EN61000-3-3, EAC TP TC 020
EMC Immunity: Compliance to BS EN/EN55035,BS EN/EN61000-4-2,3,4,5,6,8,11; light industry level(surge 2KV), EAC TP TC 020

Others

MTBF: 5489.6K hrs min. Telcordia SR-332 (Bellcore) ; 600.8K hrs min. MIL-HDBK-217F (25℃)
Dimension: 84*57*29.5mm (L*W*H)
Packing: 0.18Kg; 72pcs / 14Kg/ 0.92CUFT

Also stocked within the APV range

APV-8E-12
APV-12-12
APV-12-24
APV-16-24
APV-25-12

Constant voltage (CV) LED drivers provide a fixed DC output (usually 12V or 24V) to power LED strips, modules, and under-cabinet lighting. They are designed for parallel circuits where LEDs require consistent voltage to operate at optimal brightness. Available in various wattages (8-600W), they are ideal for, but not limited to, commercial and residential, indoor/outdoor, and dimmable applications.

Key Aspects of Constant Voltage LED Drivers:

Functionality: They convert high-voltage AC (e.g., 230V) to low-voltage DC (12V/24V).

Best Use Cases: Designed for LED tape, flexible LED strips, and linear modules that have built-in current-limiting resistors.

Common Specifications:

Voltage: 12V DC, 24V DC, 36V DC, or 48V DC.

Wattage: Typically ranges from 8 to 200W.

Protection: Often feature IP ratings (IP65, IP67) for moisture/dust protection.

Dimming Options: Available for various, methods, including DALI0-10V/1-10VTRIAC (leading/trailing edge), and Bluetooth.

Load Management: Unlike transformers, these do not have minimum wattage requirements, allowing for better flexibility in powering small loads.

Difference from Constant Current: While Constant Voltage maintains a steady 12V/24V regardless of current, Constant Current drivers keep the current (mA) steady and allow voltage to fluctuate.

Selection Considerations:

Total Power Requirement: Ensure the driver wattage exceeds the total power consumed by the LED strips (a 20% buffer is recommended).

Environment: Choose the correct IP rating for the installation location (e.g., higher IP for outdoors).

Voltage Match: Match the driver voltage precisely to the LED strip rating (12V strip = 12V driver).

Established in 1982, headquartered in New Taipei City, MEAN WELL is a Standard Power Supply manufacturer and dedicated to developing specialized industrial power supplies solutions for decades.

Marketed worldwide with its own brand “MEAN WELL”, MEAN WELL power supply has been widely used in all industries and almost everywhere in your life. From home espresso machine, Gogoro electric scooter charging station, to the well-known landmark Taipei 101 skyscraper top lighting and Taoyuan International Airport jet bridge lighting, all of these you will surprisingly find MEWN WELL Power hidden inside, functioning as the heart of the machine, providing stable voltage and current for a long time, and powering up the whole machine and system to operate smoothly.

MEAN WELL Power has been widely used in different industries such as Industrial Automation, LED Lighting/ outdoor signage, Medical, Telecommuting, Transportation and Green Energy applications.

MEAN WELL has maintained a long term, solid relationship with our customers, suppliers, and employees in the spirit of “good intention” and “reliable partner” commitments since the company founded. Over the years, MEAN WELL has built hundreds of reliable partnership around the world.