Helvar LL80HE-DA-100-800 – Easily Selectable Output via DIP Switch

LL80HE-DA-100-800 Technical Data

LL80HE-DA-100-800 Input Characteristics

Nominal rated voltage range 220 V – 240 V, 0 / 50 – 60 Hz
AC voltage range 198 VAC – 264 VAC
Withstands max. 320 VAC (max. 1 hour)
DC voltage range 176 VDC – 280 VDC
DC starting voltage > 186 VDC
Mains current at full load 0.36 – 0.41 A
Frequency 0 / 50 Hz – 60 Hz
Stand-by power consumption < 0.36 W
THD at full power < 10 %
Leakage current to earth < 0.5 mA
Tested surge protection 1 kV L-N, 2 kV L/N-GND (IEC 61000-4-5)
Tested fast transient protection 2 kV (IEC 61000-4-4)

Insulation between circuits & driver case

Mains circuit – Output Non-isolated
DALI circuit – Output Basic insulation
Mains circuit – DALI circuit Basic insulation
Mains, DALI and output – Driver case Basic insulation

Load Output (non-isolated)

Output current
Accuracy ± 2 % 1) 1) From 100 – 800 mA, minimum of 99.73 % conformance rate.
Ripple < 1 % 2) at ≤ 120 Hz 2) Low frequency, measured with Cree XP-G LED modules.
PstLM ≤ 0.12 3)
SVM ≤ 0.01 3) 3) At full power, measured with Cree XP-G LED modules.
UOUT (max) (abnormal) 350 V
EOFx (EL use) 15 % 4) 4) By default setting, available range 1…100 %

Amplitude Dimming Technology

LL80HE-DA-100-800 LED driver implements amplitude dimming technology across whole dimming range. Amplitude dimming offers the best available technology for dimming the light output in an accurate and flicker-free way to ensure high quality lighting in even the most demanding situations such as camera recording applications. Amplitude dimming technology complies with IEEE 1789-2015 recommendations of current modulation to mitigate health risks to viewers.

Connections and Mechanical Data

Wire size 0.5 mm2 – 1.5 mm2
Wire type Solid core and fine-stranded
Wire insulation According to EN 60598
Maximum driver to LED wire length 1.5 m
Weight 205 g
IP rating IP20

Installation & operation

Maximum ambient and tc temperature:

• For built-in components inside luminaires, the ta ambient temperature range is a guideline given for the optimum operating environment. However, integrator must always ensure proper thermal management (i.e. mounting base of the driver, air flow etc.) so that the tc point temperature does not exceed the tc maximum limit in any circumstance.

• Reliable operation and lifetime is only guaranteed if the maximum tc point temperature is not exceeded under the conditions of use.

At Helvar Components we create intelligent and energy-saving lighting components. We are a strong independent company with sustainability values built into our core. Our commitment to the industry has made us a leading provider of LED lighting components.

Our origin is in Finland, where today we have not just our headquarters, but our unique competence centre in Karkkila. Located just outside of the Helsinki Capital area, this centre includes decades worth of lighting experience, product developments, manufacturing, and global distribution warehouse. Worldwide, we serve our customers locally with our international sales offices and global network of partners