Liteplan NLP/1S/80-K – Basic Conversion Kit Module, TUV Certified
NLP/1S/80-K
Liteplan NLP/1S/80-K
The NLP/1S/80-K , is a high quality 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is available in 2 versions, one with PCB terminal blocks, for internal mounting inside a luminaire, or a pre-wired version for mounting remotely from the luminaire where integral mounting is not possible.
£42.05
Ex.VAT Inc.VAT£50.46
Less Than 10 Available!
Description
Liteplan NLP/1S/80-K
The NLP/1S/80-K, is a high quality 3-hour switchable emergency lighting module designed to suit a wide range of LED types, circuits and applications. The unit is designed to work with lithium iron phosphate (LiFePO4) batteries and is available in 2 versions, one with PCB terminal blocks, for internal mounting inside a luminaire, or a pre-wired version for mounting remotely from the luminaire where integral mounting is not possible.
The module automatically adjusts the output current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration. The module is supplied with a green charge healthy indicator LED. This range uses the latest LiFePO4 battery technology, dramatically reducing energy consumption and facilities management labour. Where space inside the luminaire is limited and the battery is deemed too tall, we are able to supply the NLP/1S/80-K. This is supplied with a slim LiFePO4 battery stick, ideal for slimmer luminaires.
The NLP range has been independently certified by TÜV to ensure that the product, has been tested for safety and that it complies with the requirements of national and international regulations.
- TÜV Tested and Certified
- Slim Module Suitable for Linear Applications
- Long Life LiFePO4 Batteries
- Suitable for a Wide Range of LED Loads
- Average Emergency Output for NLP/1S/80 – 2.6W
- LiFePO4 Automatic Battery Protection and Recovery
NLP/1S/80-K Specifications
(LiFePO4 replacement to Liteplan NED/3/80)
LED Voltage Range 6-80V
I Rated 385mA – 32mA
P Rated 2.6W
Battery Pack 3.2V 4.8Ah LiFePO4
Mains Supply 230-240V AC 50/60Hz
Power Rating – Charging 2.7W 17mA λ = 0.67
Power Rating – Standby * 1.2W 13mA λ = 0.40
Charge Current 225mA nominal
Recharge Period 24-hours
Battery Cut Off 2.5V
Ambient Temperature (Ta) Battery and Module 5-35°C
Case Temperature (Tc) Battery 5-55°C, Module 5-70°C
Integral Module Size 178mm x 30mm x 22.5mm FC=172mm
*Following its initial charge, the NLP/1S/80 will spend 90% of its operational life in standby mode.
Should you just require the battery from the kit; see the 3/LP48/S/TE.
The NLP/1S/80-K range is supplied as a conversion kit for integral use within a luminaire.
A 3 hour emergency lighting conversion kit which operates with Long Life LiFePO4 batteries. The unit is designed to suit an extremely wide range of LED types and circuits. The NLP/1S/80
automatically adjusts the output LED current to provide the best match between the battery and the load, providing maximum illumination whilst ensuring full battery duration.
The charger will cut-off if the Tc of the battery falls below 0 degrees C or above 55 degrees C. The product will however operate when required in emergency, providing there is enough
capacity remaining in the battery
Liteplan are the largest, privately owned emergency lighting component supplier to the UK market, whilst also shipping their products to a worldwide customer base. Established in 1994 by the late Bill Green, the company was successfully run by Bill’s right hand man, Peter Ray for many years. Peter retired in 2022 and Liteplan is now run by the next generation of Bill’s family with his son, Steve Green at the helm as Managing Director and Steve’s brother-in-law, Jonathan Bell as Director of Operations. Their Business Development Director, Adrian Spicer is a long standing and well respected figure in the world of emergency lighting. His knowledge and stature within the industry are invaluable to them.
Liteplan’s wealth of knowledge extends many years. Their Technical Manager, David French BSc. sits on the committee at ICEL and works closely with The LIA. Their Product R&D Manager, Osman Özgür Rakibet, PhD, takes control of Liteplan’s product road map. His knowledge is steering their evolution and maintaining their position as the innovators of the emergency lighting sector.
Many of Liteplan’s engineers have worked with the company for over 20 years, constantly striving to progress through the our ever evolving CPD scheme to stay at the forefront of the ever changing world of legislation.
Liteplan proudly design all of their products in-house, making product evolution a constant and seamless process. They employ over 60 local personnel, many of whom have been with them for the majority of their existence and they also pride themselves on their unrivalled delivery satisfaction level.
Their 40,000 square foot factory enables them to carry a huge level of stock, thereby fulfilling even the largest of orders with haste. They recently acquired additional warehousing adjacent to their headquarters near London’s M25. This will fuel Liteplan’s global expansion plans for many years to come.
Need to know more about Liteplan NLP/1S/80-K – Basic Conversion Kit Module, TUV Certified?
You can email us at: sales@ledparts.co.uk or alternatively you can request a callback by completing the form below and we'll get back to you as soon as possible.















