Osram ELEMENT 60/220-240/24 G2 – Economical 60W 24V LED Driver

ELEMENT 60/220-240/24 G2 Electrical data

Nominal input voltage 220…240 V
Mains frequency 50…60 Hz
Input voltage AC 198…264 V
Input voltage DC not relevant
Total harmonic distortion < 10 %
Power factor λ 0.95
Efficiency in full-load 88 % 1)

Device power loss 8.2 W 2)
Inrush current < 25 A 3)
Max. ECG no. on circuit breaker 10 A (B) 10
Max. ECG no. on circuit breaker 16 A (B) 15
Surge capability (L-N) 1 kV
Nominal output voltage 24 V
U-OUT (working voltage) 25 V
Nominal output power 60 W
Maximum output power 60 W 4)
Galvanic isolation SELV

 ELEMENT 60/220-240/24 G2 Dimensions & weight

Length 200.0 mm
Width 40.0 mm
Height 31.0 mm
Mounting hole spacing, length 192.0 mm
Cable cross-section, input side 0.75…1.5 mm²
Cable cross-section, output side 0.75…1.5 mm²
Wire preparation length, input side 5.0 mm
Wire preparation length, output side 5.0 mm
Product weight 296.00 g

 ELEMENT 60/220-240/24 G2 Colours & materials

Casing material Plastic

Temperatures & operating conditions

Ambient temperature range -20…+50 °C
Maximum temperature at tc test point 85 °C
Max.housing temperature in case of fault 110 °C
Temperature range at storage -40…+85 °C
Permitted rel. humidity during operation 5…85 %

Lifespan

ECG lifetime 30000 h 

Capabilities

Dimmable No
Max. cable length to lamp/LED module 3.0 m 1)
Suitable for fixtures with prot. class I / II
Type of connection, input side Terminal
Type of connection, output side Terminal
Number of channels 1
Overheating protection Yes
Overload protection Yes
Short-circuit protection Yes
Intended for no-load operation No

Certificates & standards

Approval marks – approval CE / RCM / CCC / MM
Standards IEC 61347-1 / IEC 61347-2-13 / IEC 62384 / IEC 61000-3-2 / CISPR 15 / IEC 61000-3-3 / IEC 61547
Type of protection IP20

Logistical data

Commodity code 85044083900

Non-dimmable constant voltage LED drivers provide a fixed, stable DC output (usually 12V or 24V) to power LED strips, tape lights, and modules in parallel without dimming capabilities. They ensure consistent, flicker-free brightness, increased reliability, and long lifespans for fixed-output, non-dimmable applications such as signage and general, residential, or commercial, lighting.

Key Aspects of Non-Dimmable Constant Voltage Drivers

Function: These drivers convert high-voltage AC input into a fixed low-voltage (e.g., 12V DC or 24V DC) required for, typically, 12V or 24V LED tapes and strips.

Applications: Ideal for , environments, where, constant, brightness, is, required, such, as, under-cabinet, lighting, display, cases, signages, and general ambient, lighting,.

Features:

No Dimming: These units do not respond to dimming signals (e.g., DALI, 0-10V, TRIAC).

Safety & Reliability: They often feature protections against short circuits, overloads, and overheating.

IP Ratings: Available in various IP ratings for indoor (e.g., IP20) or outdoor/damp (e.g., IP67) use.

Common Specifications:

Output Voltage: Predominantly 12V or 24V DC.

Wattage: Ranges from low-wattage for small, projects, to, higher-wattage, options, for, extensive, lighting, installations,.

Benefits: These drivers are generally more cost-effective than dimmable alternatives, offer a straightforward installation, and ensure a stable, flicker-free light output.

OSRAM Licht AG is a German company that makes electric lights, headquartered in Munich and Premstätten (Austria). OSRAM positions itself as a high-tech photonics company that is increasingly focusing on sensor technology, visualization and treatment by light.[3] The company serves customers in the consumer, automotive, healthcare and industrial technology sectors.[4] The operating company of OSRAM is OSRAM GmbH.

Osram was founded in 1919 by the merger of the lighting businesses of Auergesellschaft, Siemens & Halske and Allgemeine Elektrizitäts-Gesellschaft (AEG). Osram was a wholly owned subsidiary of Siemens AG from 1978 to 2013. On 5 July 2013, Osram was spun off from Siemens, and the listing of its stock began on Frankfurt Stock Exchange on 8 July 2013.[5] Osram’s business with conventional light sources was spun off in 2016 under the name Ledvance and sold to a Chinese consortium.[6]

After a bidding war[7] with Bain Capital, Osram was taken over by Austrian company AMS in July 2020.[8][9][10] Since then, the company has operated under the name AMS Osram.[11]

The name is derived from osmium and Wolfram, German for tungsten. Both elements were commonly used for lighting filaments at the time the company was founded.

In 2020 ams AG acquired the German lighting, LED, and opto-semiconductor manufacturer OSRAM. Since then, the company operates under the name ams OSRAM.

The ams OSRAM portfolio includes light emitters, sensors and CMOS ICs with embedded software solutions as well as lighting systems and specialty lamps for automotive, industrial and entertainment applications. The company mainly address the automotive, industrial and medical markets, as well as selected fields of consumer electronics.