Euchips EUP30T-1HMC-0 – Economical 30W TRIAC Dimmable LED Driver

EUP30T-1HMC-0 Common Data

EUP30T-1HMC-0 Output

Current: 550mA, 600mA, 650mA, 700mA, 750mA, 800mA, 850mA, 900mA
Voltage: 9-42VDC, 9-42VDC, 9-42VDC, 9-42VDC, 9-40VDC, 9-38VDC, 9-35VDC, 9-33VDC
Power: 23.1W, 25.2W, 27.3W, 29.4W, 30W, 30.4W, 29.75W, 29.7W
Current accuracy: ±5%
No load output voltage: 50VDC Max
Output LF current ripple(< 120 Hz): ＜3%
Channels: 1

EUP30T-1HMC-0 Input

Voltage: 220– 240VAC
Frequency: 50/60Hz
Current: 0.17Amax@230VAC
Power factor: ＞0.9@230VAC,full load
THD: <20%@230VAC,full load
Efficiency: 82%@230VAC,full load
Inrush current: Cold start, 15A(twidth=24us measured at 50% Ipeak) @230VAC

EUP30T-1HMC-0 Protection

Short circuit: Close output recovers automatically after fault
removed
Over load: When the output voltage is exceeded, the output
current decreases and, recovers automatically when
the load is reduced.
Over temperature: Shut down the output, recovers automatically when temp. back to normal.

EUP30T-1HMC-0 Function

Dimming: Triac/ELV

Others

Dimension: 185*42.5*28.5 mm（L*W*H）
G.W: 150g
Working temp.: -20℃ ~ 50℃
Relative humidity: 20~90% RH

EUP30T-1HMC-0 Dimensions

Cautions

1. The product shall be installed and serviced by a qualified person.

2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors please ensure it is mounted in a water proof enclosure.

3. Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.

4. Please check if the output voltage and current of any LED power supplies used comply with the requirement of the product.

5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector.

6. For safety consideration, PVC or rubber cord of 0.75-2.5mm2 is recommended for input and output terminal(s) (excluding signal terminals). Flat power cord is not suitable.Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.

7. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.

Constant current TRIAC LED drivers are power supplies designed to drive LEDs at a fixed, consistent current (e.g. 350mA or 700mA) while allowing brightness adjustment via standard, trailing-edge, or leading-edge mains dimmers. They maintain stable light levels, prevent damage, extend LED lifespan, and often feature dip switches for multiple output current options.

Key Features and Functions:

Constant Current Regulation: These drivers maintain a steady current regardless of fluctuations in voltage, protecting LEDs from overheating.

TRIAC Compatibility: They are designed to interface with traditional, phase-cut (TRIAC) dimmer switches, making them ideal for upgrading traditional lighting systems to LED, with many compatible with both leading-edge and trailing-edge dimmers.

Adjustable Output (Selectable): Many modern models feature DIP switches, allowing a single driver to be configured for multiple output currents (e.g. 350mA to 700mA) and voltage ranges.

Form Factor: They are typically compact, suitable for installation in tight spaces like downlight housings.

Protection: These units often include safety features such as short-circuit protection.

Typical Applications:

Downlights and Spotlights: Ideal for high-power COB LEDs and recessed lighting.

Linear Lighting: Suitable for LED strips and chains of LEDs connected in series.

Residential & Commercial: Used in spaces requiring precise, smooth, and dimmable, flicker-free lighting.

Common Specifications:

Output Current: Ranging from 250mA up to 1050mA+.

Power Output: Ranging from small 3-7W drivers to higher wattage units (e.g., 40W–60W).

Compatibility: Supports both leading-edge and trailing-edge (TRIAC) dimmers.

IP Ratings: Available in various IP ratings for indoor or protected applications (e.g., IP20).

It is important to select a driver with a wattage range that matches the LED load, as improper matching can lead to flickering or, in some cases, failure.

Founded in 2005, Euchips is a leading global manufacturer specializing in LED controllers, dimmable drivers, and advanced lighting control systems. Operating under the slogan “Universal Compatibility, Flicker-free,” they serve clients worldwide in hotels, casinos, commercial buildings, and luxury residences.

Core Products & Technology

Euchips develops a broad portfolio of architectural and commercial lighting solutions:

Lighting Protocols: DALI, 0-10V, Triac, and DMX512 controllers and dimmers.

Drivers & Interfaces: Smart wireless drivers, LED dimmable drivers, and control systems.

Compatibility: Their products are designed to integrate with major global systems, including Lutron, Philips, ABB, and Schneider.

Company Profile & Milestones

Patents & Certifications: They hold over 90 patents and have secured international safety and quality certifications such as CE-LVD, ENEC, and SAA.

Global Reach: Their products are exported to more than 90 countries and regions.

Manufacturing: Alongside their longstanding operations, they officially opened a 4,000-square-meter factory in Vietnam to increase production capacity and better meet customized lighting needs.